Pololu robotics kits

The Pololu 8x2 Character LCD  is a compact display ideally suited for microcontrollers and small mobile robots. It uses the industry standard HD44780 parallel interface, making it very easy to use with many different microcontrollers.

The iMAX-B6AC can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells

The Pololu Metal DC Gearmotor 25Dx52L 34:1 with encoder is a compact gearmotor made of a powerful direct current motor, a 34:1 gear reductor that can reach a rotation speed of 285 RPM with a torque of 4.3 kg cm, and a high precision encoder that provides 1633 counts per turn of the output shaft.

The Pololu Metal DC Gearmotor 25Dx54L 75:1 with encoder is a compact gearmotor made of a powerful direct current motor, a 75:1 gear reductor that can reach a rotation speed of 130 RPM with a torque of 9.36 kg cm, and a high precision encoder that provides 3592 counts per turn of the output shaft.

These aluminium gearmotor brackets will let you mount Pololu's 25D gearmotors to your contraption. The packet pair comes with M3 screws in order to attach your motors. These brackets were designed to feature some flexibility as they have several mounting holes and slots for M3 and #4 screws.

The Pololu Universal Aluminium Mounting Hub Shaft allows you to attach wheels or other mechanisms to 4 mm motor shafts. It provides two mounting hubs along with two 4-40 screws and the corresponding Allen wrench to secure the hub to the motor shaft. Each mounting hub has 4 holes for 4-40 screws (not included) that can be used to attach a wheel.

This IR beacon transceiver is to be used in pair to allow two robots to detect each other.

Micro Metal Gearmotor 30:1 to motorize your Zumo robot.

This expansion kit allows you to add a second level to your 3pi robot. Cutouts allow you to view the LCD. Color: red.

This digital infrared proximity sensor from Pololu detects objects between 0.5 and 5 cm. Its main characteristics are a quick response time, a small size, low current draw and a compact carrier PCB that makes it easy to integrate into your project.

Micro Metal Gearmotor 50:1 to motorize your Zumo robot.

Micro Metal Gearmotor 75:1 to motorize your Zumo robot.

Rechargeable Pololu battery AAA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 900mAh.

The mbed NXP LPC1768 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 processor. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly.

This expansion kit allows you to add a second level to your Pololu 3pi robot. The shape without cutouts offers a big prototyping surface. Color: black.

This expansion kit allows you to add a second level to your 3pi robot. Cutouts allow you to view the LCD. Color: black.

This tiny dual motor driver from Pololu carries a TI DRV8833 dual H-bridge. Supplyied with a 2.7 - 10.8 V voltage, it can deliver 1.2A (2A peak) to two DC motors. It integrates protections against reverse-voltage, under-voltage, over-current, and over-temperature.

This dual motor driver from Pololu is based on Freescale’s MC33926 full H-bridge. It has a 5 – 28 V operating range and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The dual motor driver works with 3 – 5 V logic levels, supports up to 20 kHz PWM and has many protections.

DC motor controller with 4 interface modes: USB, logic level, analog voltage and RC.

This expansion kit allows you to turn your Pololu 3pi mobile robot into a m3pi mobile robot. It contains all needed components and connectors that have to be soldered in.

The Pololu MinIMU-9 v2 is an inertial measurement unit (IMU) packing an L3GD20 3-axis gyro and an LSM303DLHC 3-axis accelerometer and 3-axis magnetometer on a tiny 23 × 15 mm board. The nine independent rotation, acceleration, and magnetic measurements can be retrieves by I2C and used to calculate an attitude and heading reference system (AHRS).

3pi is a mini mobile robot with two micro motors, sensors and a LCD screen, all controlled by an ATMega328 microcontroller programmed in C.

This digital infrared proximity sensor from Pololu detects objects between 2 and 10 cm. Its main characteristics are a quick response time, a small size, low current draw and a compact carrier PCB that makes it easy to integrate into your project.

m3pi is a mini mobile robot based on a 3pi mobile robot with sockets that can receive a mbed development board with a 32 bits ARM microcontroller, a Wixel wireless module and a XBee module.

This chassis in transparent acrylic has useful cutouts to build your own mobile robot and interface with Pololu's accessories.

Programmer for microcontrollers based on AVR technology. This programmer has been specificaly designed to program 3pi and m3pi robots from Pololu.

This expansion kit allows you to add a second level to your Pololu 3pi robot. The shape without cutouts offers a big prototyping surface. Color: red.

The Programmable Wireless USB Wixel Module is a general-purpose programmable module providing integrated 2.4 GHz wireless communication and full-speed USB interface.

This small mobile robot uses an Arduino board and is designed to achieve sumo tournaments through its faceplate. This robot kit is supplied without motor and Arduino board.

The Interchangeable AC/DC Power Supply 5V allows you to power a large range of devices thanks to its 8 interchangeable output DC plugs. It also offers 4 different power input AC plugs (Australia, Europe, UK and US) making it usable in most countries.

This encodeur for micro metal gearmotor allows to measure direction and speed of the rotation of the motor.

The Servo Controller Mini Maestro 24-Channel allows you to drive your servos using one of three interfaces: USB, serial TTL, and embedded scripts. It provides fine-grained speed and acceleration control thanks to its very high resolution (0.25µs).