Dynamixel modules and pieces
All accessories allowing you to power, command and attach Dynamixel servomotors to build mobile robots and robotics arms.
Use the M3x8 wrench bolts to fix your Dynamixel servos securely.
The USB2AX is a small interface to control Dynamixel servomotors like the AX-12 or the MX-28T from a computer.
The U2D2 board from Robotis enables you to supply a variety of power sources to your Dynamixel servo motors.
Program many Dynamixel servos directly with the U2D2 Dynamixel/PC connector, for AX/MX to pro series!
A sensor that can detect contact with surrounding surfaces and objects.
A standard robot cable for connecting securely to your waterproof Dynamixel servo motors.
The SMPS2Dynamixel allows you to power your Dynamixel servomotors if you don't use a controller.
The PS-10 SMPS charger allows you to power your Dynamixel controllers and servomotors.
This set of 5 FP04-F9 side mounting frames is designed for the Bioloid robotics kits by Robotis.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
The FP04-F8 frames from Robotis are designed to adapt perfectly to the Dynamixel AX-series servo motors.
A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.
Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!
This set of 10 FP04-F3 side mounting frames is designed for the Bioloid robotics kits by Robotis that use the AX series Dynamixel servomotors.
Use the proper bolts for fixing your Dynamixel servos!
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
Need a remote to control your Robotis robotics kit? The RC-100B Remote Control offers you up to 1,023 different command combinations and 3 different communication protocols!
Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!
One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!
An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!