Dynamixel modules and pieces
All accessories allowing you to power, command and attach Dynamixel servomotors to build mobile robots and robotics arms.
This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!
Bundle of all accessories required to configure and supply power to your Dynamixel servomotors.
This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.
This gear set is designed to replace the gear parts on the X540 servo motors equipped with a reduction ratio of 270:1.
This metal gear set is designed to last longer and resist abrasion. The gears are compatible with all servo motors in the Dynamixel X540-150 series with a TTL or RS-485 connection.
The Robotis Gear/Bearing Set for the MX-106 servo motor has been designed for the long-lasting replacement of your gear and bearing parts: robustness, endurance, and long life are the keywords here!
Structural components for building a prehensile hand for the DARwin-OP humanoid robot
Use the Dynamixel FRP54-H221K structural components to mount your Dynamixel Pro 54-200 servo onto an articulated frame.
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
This structural component and idler for the Dynamixel XW540 servo is one of various sets proposed by Robotis for assembling servos in different configurations.
The FRP42-H121K Set is designed to fit Dynamixel Pro 42-Series servomotors.
The HNX430-I105 set includes a rudder, a frame, and a bracket, as well as the necessary bolts to secure the assembly. It is specifically designed to be compatible only with Dynamixel XW430 servomotors.
Use the compatible Dynamixel FRP54-H121K structural components to mount your Dynamixel Pro 54-100 servo securely onto an articulated frame.
You can now power, connect and program all your Dynamixel servos, whatever the model, thanks to this official and very clever Dynamixel starter set.
Give your robot a gripper with this Dynamixel FR12-G101GM Frame Set!
With the FR04-G101GM set from Robotis, you’ll get the same gripper frames as the ones used for the GP robot.
The Dynamixel FR13-H101K kit can be used to create an articulated frame for your Dynamixel X540 servo motor.
The 903-0205-000 gear/bearing set is the replacement kit to choose if you want to give your Dynamixel MX-64 servo motor a new lease of life.
Black frame to connect 2 Dynamixel EX-106+ or MX-106 in dual mode.
Frame to connect 2 Dynamixel EX-106+ or MX-106 in dual mode.
This structural component is designed specifically for the Dynamixel XW540, to fix your servo in the position that suits you best.
The gear set for Dynamixel XH430/XM430, Gear Ratio 350:1 includes all the replacement gears you need for your compatible Dynamixel servos.
The Gear Set for Dynamixel XH430/XM430, Gear Ratio 210:1 includes all the replacement gears you need for your compatible Dynamixel servos.
This 4-pin extension cable is 1 metre long and compatible with the servo motors in the Dynamixel XW series.