.
Structure and chassis
Wheeled or tracked chassis, aluminium beams, structural parts, screws, bolts... You will find here everything you need to build the frame of your robot or machine!
8 pieces of 40mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
The ServoCity Ball Bearing Idler Shaft integrates easily into projects with timing belts.
This spike tire set is compatible with all Tamiya gearbox kits.
The PT-2100 Jib Mounting Kit offers a new means of attaching your pan & tilt system – now you can fix it to a crane jib and enjoy a bird’s-eye view of your subject!
This M3 Hex Nut Driver is compatible with all the MakerBeam brand nuts.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL
10 cables (10cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
This ServoCity set offers an ultra-comprehensive collection of aluminium profiles and their compatible mounting hardware, for all your robotics creations!
Creating a metallic structure both robust and fully tailored to your project has never been easier with the MakerBeam Starter Kit in anodised aluminium!
Bag of 100 wing type bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam
The Arduino, Raspberry Pi and SparkFun RedBoard-compatible Sprout Runt Rover™ robotics chassis is the perfect companion for discovering and learning, and requires just a few minutes’ assembly time.
These MakerBeam black anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam
The 9’' V-Roller linear slide kit will provide a solid base for your next rail-based robotics project.
The right Mecanum wheel from Nexus Robotics Ltd is comprised of 12 nylon rollers mounted on two aluminium plates. They provide a full freedom of movement to your mobile robot.
These MakerBeam anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam
Discover the joys of travelling with this linear slider designed for shooting videos – your GoPro can travel up to 48.2 cm!
These 12 mm linear ball bearings enable a very smooth motion along rails.
8 pieces of 60 mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
Use this small and light polyurethane wheel with all kinds of motors thanks to the available adapters.
The ServoCity auxiliary joystick controller is to be used in conjunction with the main joystick controller that comes with the ServoCity open loop pan and tilt systems. It allows you to control 2 additional gear motors.
These 4 black vinyl end caps will fit tightly around the your beams. They can be easily removed and reused.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam
Bag of 100 square headed bolts M3 for MakerBeam, length: 12mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam
If you’re going to use a MakerBeam kit to create your metallic structures, you might as well choose the Premium version: you’ll be sure to have all the necessary components on hand!
10 cables (14cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
This set contains over 600 robot parts... ServoCity has thought of everything to help you build your dream project!