Câbles

Different types of cables for your robots or other projects. You will find here USB cables (all types), as well as cables for prototyping (jumper, Dupont...).

Active filters

Make sure you always have your favourite cables to hand when prototyping! This hook-up wire spool set of 22 AWG cables in various colours will save you the hassle of looking everywhere for your breadboard cables – they’re all there, stored neatly away, just waiting to be used!

In Stock

This pack of thirty 3-wire extension cables by Parallax will prove extremely useful when wiring your projects, however big or complex!

In Stock
€14.85 €16.50 -10%

Connect up to four USB devices thanks to this compact USB hub and benefit from an incomparable data exchange rate thanks to the USB 3.0 communication protocol!

In Stock

This pack of 50 jumper male-male is a good start to get your prototyping starting!

In Stock

A USB TTL serial cable for connecting your Raspberry Pi to your computer. 4 cables + 1 USB port = simple and effective!

In Stock

With the strip of 40 premium M/F jumper wires (300 mm), you can connect the GPIO pins on your Raspberry Pi.

In Stock

This strip of 40 premium M/M jumper wires is great for making neatly organised wire harnesses on a standard pitch (2.54 mm) header.

In Stock

Make neatly organised circuits with these female/female 30-cm long jumper wires in various colours!

In Stock

Set of colored jumper cables with stiff ends molted on for breadboards.

In Stock

This 5V USB to 9V jack power cable ideal for your Marty robot, but it can be used anywhere a 9V source is needed.

In Stock

A set of 40 female-female cables of different colors for standard 0.1" (2.54mm) headers.

In Stock

You can use this 40 jumper wires harness as it is, or you can pull the ribbon wires off to make individual jumpers, pretty cool!

In Stock

This pack of 40 jumper wires will come in handy for making wire harnesses or jumpering between headers on PCB's. Plus, you can also pull them off to use them individually. A must have for your prototyping projects!

In Stock

A strip of 40 premium male/male jumper wires of 150 mm length for your assemblies. If you don’t want to connect them in strip, no problem, you can detach them to use them individually.

In Stock

A dedicated USB cable/jack to connect your Odroid boards to a USB host.

In Stock

This set of 10 30 cm long 3-pin cables is for use with sensors, servomotors and other RobotGeek modules.

In Stock

USB cable used for PC programming of a microcontroller with a USB mini-B port.

In Stock

Set of 40 jumper wires with male header contacts on either end for connecting PCBs.

In Stock

4.5 m of 10-wire ribbon cable for neat connections!

In Stock

This 40 jumper wires harness will be quite handy for prototyping.You also have the possibility to pull the ribbon wires off to make individual jumpers.

In Stock

The 4-Pin Female Jumper to Grove 4-Pin Conversion Cable (x 5) will make it easier for you to connect your Grove modules.

In Stock

USB Type-A to mini B cable: the most practical for lightweight devices

In Stock

These 3 pin couplers will be very useful when converting your jumper wires into home extension wires!

In Stock

USB cable A-microB

Out-of-Stock