dFlex Flexible Sensor NXT / EV3
€27.62 Save 25%
Including €0.01 for ecotax (not impacted by the discount)
Measure bending motions and make robots that mimic you. dFlex flexible sensor measures angular displacement, or bend, of the sensor. The sensor bends and flexes with mechanical motion.
Use dFlex to make your robots mimic you and your fingers or as sensitive mustaches on a mobile robot. The dFlex can be mounted using mechanical means, Velcro, or 3M medical tape. The dFlex plugs directly into your NXT and our easy to use software gets you up and running in minutes.
Some videos showing usages of the dFlex sensor:
Technical specifications of the dFlex sensor for NXT robot
- Bend Range: -90 to 180 Degrees
- Granularity: ~ 1 Degree (0 to 180 Degrees )
- Operating Temperature: -35 C to 80 C
- Life Cycle: > 1 Million Bends
- Active Sensing Length: 3.75" (95 mm)
- Cable Length: ~ 2' (60 cm)
- Cable Termination: Male NXT
- Connection Type: Analog
To know more about the dFlex sensor, read the official documentation by clicking on the following image:
Programming the dFlex sensor for Lego Mindstorms NXT robot
Programming the dFlex sensor for Lego Mindstorms NXT robot using NXT-G
The dFlex sensor for Lego Mindstorms NXT robots is programmable using NXT-G. Click on the following image to download the NXT-G block to program the dFlex sensor:
Programming the dFlex sensor for Lego Mindstorms NXT robot using RobotC
The dFlex sensor for Lego Mindstorms NXT robots is programmable using RobotC. Click on the following image to download the third party RobotC drivers.
To know more, visit the Dexter Industries web site : http://dexterindustries.com/Products-dFlex.html