Gadgeteer MaxO expansion Module
The Gadgeteer MaxO expansion Module
This Gadgeteer module allow expanding one Gadgeteer mainboard S socket to 32 inputs / outputs. It is possible chaining 4 of these modules to reach a whooping 128 additional I/O from a single Gadgeteer mainboard socket.
330ohm resistors are present on the board to allow you directely adding your LEDs or transistors. Each pin can drive 10mA.
Technical specifications of the Gadgeteer MaxO expansion Module
The technical specifications of this Gadgeteer module are as follows:
- Socket: S
- Size: 140mm x 20mm
- Weight: 4g
- 3.3V Consumption : depends on the number of modules chained and use of outputs
- 5V Consumption: 0mA
The Gadgeteer MaxO expansion module is provided with a Gadgeteer cable.
The Gadgeteer MaxO Module is ROHS compliant.