PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot

Makerbot | A-000000-01236

PLA Filament MakerBot is a bioplastic derived from corn guaranteed without any heavy metals; phtalates or BPA. This PLA filament is compatible with 3D printer MakerBot Replicator 2.

End of life product

Quantity

Get a quote online

Obtenez votre devis en 3 étapes !

1. Ajoutez les articles qui vous intéressent dans votre panier

2. Rendez-vous sur votre panier

3. Cliquez sur OBTENIR UN DEVIS

Your quotations are available online on your customer account.

Size Chart

Wishlist

Description
Questions(FAQs)

Presentation of PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot

Every filament color is thoroughly tested with print resolutions of 100 and 200 micron on 3D printer MakerBot Replicator 2 to check that the 3D printing renders what MakerBot MakerWare and MakerBot Desktop software enable you to design.

PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot sticks to acrylic and build plate tape. 3D printing with a large bottom base might curl, so in order to prevent this from happening, we recommend you to use a raft underneath your printing.

It is also recommended to keep PLA filament MakerBot in a cool and dry place as moisture from air tend to be absorbed by PLA filament over time and it may affect quality and performance of PLA Filament MakerBot.

You have to make sure that the build plate is level, clean and oil-free to have the best 3D printing result.

PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot technical specifications

Technical specifications of PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot are the following:

Glass temperature: 60 - 65°C/140 - 149°F
Melting temperature: 150 - 160°C/302 - 320°F
Nozzle temperature: 230° C/ 446° F)
Spool Diameter: 20.32 cm/8 inches
Spool width: 7.62 cm/3 inches
Diameter: 0.175 cm/0.068"
Weight: 1 kg/2.2 lb

Resources for PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot

The PLA filament Fluorescent Green diameter 1.75 mm/1 kg (2.2 lb) by MakerBot Material Safety Data Sheet is available if you need further information: