HS311 Continuous Rotation RC Servo with mounting kit for Lego Mindstorms
This kit allows you to use a Continuous Rotation RC servomotor in your Lego Mindstorms robots. This kit is ideal for medium force movements.
This kit contains a Continuous Rotation HS 311 servo, mounting plates to hold the actuator, Horn plates, screws and installation instructions.
The kit does not include blue pins as shown in the picture.
To use RC Servos with your Lego Mindstorms, you will need a 8 Channel Servo Controller for Lego Mindstorms (NXTServo-v3).
Technical specifications of the Continuous Rotation HS311 servo
The technical specs of the Continuous Rotation HS311 servo are as follows:
- Weight: 43 grams
- Swing: Continuous Rotation
- Recommended operating voltage: 4.8V
- Stall Torque: 6.0v >/= 3.7kg.cm 4.8v >/= 3.0kg.cm
- Operating Speed at 6.0v: 0.15sec/60°
- Operating Speed at 4.8v: 0.19sec/60°
Dimensions of the Continuous Rotation HS 311 servo
The following picture describes the dimensions of the HS311 servo from Hitech. If you think of using another servo with the mounting plates, be sure that the dimensions remains the same with a 0.2mm tolerance.
- A = 19.82mm
- B = 13.47mm
- C = 33.79mm
- D = 10.17mm
- E = 9.66mm
- F = 30.22mm
- G = 11.68mm
- H = 26.67mm
- J = 52.84mm
- K = 9.35mm
- L = 4.38mm
- M = 39.88mm