Bogie Runt Rover™ robot chassis kit
This all-terrain robotics kit with 6 drive wheels and an articulated suspension system is great for climbing over many obstacles on rugged terrain.
Including €0.20 for ecotax
Bogie Runt Rover™ mobile robot: truly an acrobat
With 3 press fit wheels on each side, the “Rocker-Bogie” articulated suspension system giving it its distinctive “swing”, high-traction rubber tyres and much more, the ServoCity Bogie Runt Rover™ robot chassis is unstoppable on and off-road. With 13 cm of ground clearance and 12,7 cm of flex, this little robot can cope with many an obstacle and is so much fun to drive!
A 6-wheeled robotics chassis that you can modify at will
Apart from the sturdy chassis components, wheels and motors, you can modify this all-terrain robot at will: you can effortlessly attach a microcontroller or a motor drive and the accompanying batteries. Also note that the ABS plastic plates are easy to pierce and can accommodate any electronic modules. You can also add a few Actobotics structural parts in aluminium to refine your robot even further!
Technical specifications of the Actobotics Bogie Runt Rover chassis
The kit includes:
- 6 x 64,8 mm press fit wheels
- 6 x 140 rpm pre-wired motors
- 4 type A attachment blocks
- 4 type B attachment blocks
- 1 ABS robot chassis
- 8 x 6-32 x 9.5 mm pan head screws
- 2 x 6-32 x 11.1 mm pan head screws
- 2 x 6-32 x 19.1 mm pan head screws
- 7 x 6-32 x 22.2 mm pan head screws
- 9 x 6-32 locknuts
- 18 x #6 washers
- 12 x 4-40 x 25.4 mm pan head screws
- Motor specifications:
- Recommended voltage: 4.5 Vdc
- No-load speed: 140 rpm
- No-load current: 190 mA
- Maximum current: 250 mA
- Torque: 800 gf-cm
- Total weight: 576 g
Resources for the Bogie Runt Rover mobile robot for high obstacles
Want to assemble your Bogie Runt Rover in no time? Want to control it with your phone? Or get a detailed view? Check out these resources!