This ServoCity camera slider kit contains aluminium Actobotics parts and all the components needed for assembly (screws, bolts, spacers, structural plates, etc.). It allows you to mount a video camera on the slider and move it over a distance of more than 48 cm. To vary the travel speed, simply select the speed of your gear motor using this formula:
6.3 /[no. of seconds for full travel at maximum speed)/60]
If you want to travel 19" in 30 seconds, you will therefore need a 6.3/[30/60] = 12.7 RPM motor.
And because the kit is very light (less than 500 g without the servo), you can carry your equipment anywhere. Choose from among the parts in the Actobotics range to upgrade your kit and build the video project of your dreams!
Technical specifications of the video linear slider kit
Kit includes:
1 x 609.6 mm aluminium channel
1 flat channel bracket
2 dual side mounts
25 x 6.35 mm 6-32 socket head cap screws (x 2)
4 x 25.4 mm 6-32 socket head cap screws
1 type-A hub adapter
1 x 9.5 mm hub spacer
1 x 12.7 mm hub spacer
1 C-type side tapped pattern mount
1 E-type side tapped pattern mount
1 B-type aluminium motor mount
2 x 6.35 mm bore bottom tapped pillow blocks
4 x 6-32 tapped standoffs
12 x 6.35 mm shafting and tubing spacers
1 flanged ball bearing (ID 6.35 mm, OD 12.7 mm)
1 x 6.35 mm steel set screw collar
2 x 6.35 mm bore pinion pulleys (15 teeth)
1 x 1.16 m timing belt
1 x 6.35 to 6 mm set screw shaft coupler
1 A-type XL belt mount
1 D-shaft (6.35 x 31.75 mm)
1 D-shaft (6.35 x 44.45 mm)
1 pair of D-type channel sliders
1 pair of A-type channel feet
1 acetyl carriage bolt plate
1 x ¼-20 carriage bolt
1 ¼-20 knob
Overall length: 609.6 mm
Weight (without servo): 498.9 g
Motor compatibility: 3–12V standard spur gear motors
Travel: 482.6 mm
Tools required for kit assembly:
1 x #2 Phillips screwdriver
1 x 3/32” Allen key
1 x 7/64” Allen key
Resources for the 637108 Slider Kit
Assemble your video slider kit rapidly and discover new ways of improving it below: