MPT1100-SS Pan & Tilt System
The MPT1100-SS is a heavy-duty pan & tilt system delivered assembled and ready to run with its double motor controller.
MPT1100-SS pan & tilt system: a first-rate kit for photographers
The MPT1100-SS pan & tilt system is the ideal size for DSLRs and smaller bodied cameras. The super light 6061-T6 aluminium structure makes this ServoCity kit able to handle up to twice its own weight. The head is mounted on a round base plate that you can attach to a jib crane (using a specific mounting kit, sold separately) or on top of a tripod. You’ll be able to capture a vast landscape without hurting your neck!
Master movement with the two-channel digital controller
The MPT1100-SS pan & tilt system comes with its own dual motor controller, allowing you to choose both the position and the speed of the two axes (tilt and pan). The speed of each axis can be limited by the min/max knobs for ultra-slow shots. The controller links to the pan and tilt head with a single CAT6 cable and is powered by a 12V supply (included). The remote control is equipped with a clamp collar and can be attached easily to the counterweight of a crane.
Technical specifications of the MPT1100-SS pan & tilt kit
- Dimensions: 311.1 x 215.9 mm
- Weight: 1.315 kg
- Maximum payload: 2.721 kg
- Anodised adjustable 6061-T6 aluminium framework
- Hollow shafts for running the motor cables through the middle
- Hollow shafts mounted on dual ball bearings
- 32-tooth precision gear motors
- Comes fully assembled
The system includes:
- 1 pan and tilt head
- 1 proportional remote controller
- 1x 7.62 m CAT6 cable
- 1 x 12V power supply
- 1 camera mounting screw
Resources for the MPT1100-SS system
Review these useful links for putting your MPT1100-SS pan & tilt system to its most effective use: