DDT560 6” Tilt System
The DDT560 Tilt kit for servos is a direct drive tilting system with a cradle supporting cameras up to 1.360 kg.
DDT560 6” Tilt: a modular solution for your video projects
This kit tilt is designed for photographers and budding videographers looking for a modular tilting platform. The cradle can support devices weighing up to 1.3 kg and with a body width of 15.24 cm or less. The plate has numerous mounting holes so that you can balance the mass of the object to be tilted and create a steady rocking movement.
The height of the cradle is adjustable by moving the servo and bearing mounts up or down the outside frame. Many configurations are possible, as shown in the various example photos on this page.
A servo tilt kit compatible with Actobotics components
The kit can also be attached to Actobotics aluminium structural components using the 19.5 or 38.1 mm hub pattern thanks to the compatible screws included, for greater freedom in creating your robotics chassis.
The included servo mounting bracket is compatible with any standard size servo (with a 24 or 25-tooth spline). If you wish to shoot at 360°, you just need to attach a continuous turn servo.
Technical specifications of the DDT560 6” tilt kit for servos
- Dimensions: 228.6 x 177.8 mm
- Weight: 326 g
- Maximum payload: 1.360 kg
- Servo spline compatibility: 24-tooth or 25-tooth standard spline
- Servo size compatibility: standard
This kit includes:
- 1 ABS plastic base plate
- 7 aluminium brackets
- 4 aluminium spacers
- 1 ABS camera plate
- 4 screws to attach tilt to pan or other devices
- 1 x ¼-20 x 9.5 mm camera mounting screw
- All the necessary hardware to assemble the kit
- 1 servo motor
- 1 pan system