We help you to get started quickly with our webinar about NED robot arm, co-hosted by Nicolas Piot (Génération Robots) and Paul Baronnat (Niryo Robotics).
Niryo Ned: a cobot designed for teaching and rapid prototyping
Niryo Ned arm is a 6-axis collaborative robot designed for education (engineering schools, vocational training establishments, training centres, etc.) and for research laboratories. Niryo lets students take on Industry 4.0 challenges at an early stage in their education.
Niryo Ned is ideal for reproducing and imagining industrial use cases without blowing the budgets of educational institutions.
This robot arm has an embedded Raspberry Pi, Dynamixel motors, Arduino components and runs under ROS Melodic (ROS libraries are available online to help you design lots of simple and complex programs).
Ned: an enhanced Niryo One
With Niryo One, Niryo released a robot arm that met market needs. Niryo Ned is the 2nd version of this educational robot, a simple-to-use, robust and efficient cobot designed for learning.
Its aluminium structure offers better repeatability and precision than its predecessor. Ned is designed to reproduce all the most advanced Industry 4.0 movements.
It is built on a Raspberry Pi 4, so it also has more computing power for meeting the most recent industrial IoT and AI challenges.
Comparison of the Niryo One and Niryo Ned robot arms
Niryo One | Niryo Ned | |
Degrees of freedom | 6 | 6 |
Weight | 3.3 kg | 6.5 kg |
Structure | PLA (3D printing) | Aluminium, PLA (3D printing) |
Repeatability | +/- 1 mm | +/- 0.5 mm |
Payload | 300 g | 300 g |
Max. reach | 440 mm | 440 mm |
Electronics / Motorisation | Raspberry Pi 3 B | Raspberry Pi 4 |
Programming | Blockly, Python, C++, ROS, MATLAB | Blockly, Python, C++, ROS, MATLAB |
Practical exercises to help you get started
There are numerous educational resources in the form of practical activities including different exercises. These PDFs are available online for free and will help you quickly understand the different programming possibilities and applications offered by the Niryo One and Niryo Ned robot arms.
Niryo regularly publishes new teaching resources for its Niryo robot arms. The following have been published so far:
- Quick start guide
- Programming with Blockly
- Programming with Python
- Introduction to vision with Blockly
- Programming with ROS
- Trajectory generation and simulation with MATLAB
- Python image processing
Accessories for a complete Industry 4.0 training ecosystem
Various accessories are available which you can use to upgrade your Niryo Ned, including a mini conveyor belt, an on-board camera and different types of grippers (vacuum pump, electromagnet, etc.).
Niryo robots are used by our customers
Génération Robots has been the official distributor of the Niryo brand since 2019. We sell their robots to universities, engineering schools and training centres.
On our blog, you will find an example of how our customers use their Niryo robot: how the Deutsche Bahn public transport operator has introduced Niryo at their training centres in Germany
Discover The Ned Webinar Promotion
1 Ned Robot + 1 Conveyor belt EDU + 1 Vision Kit + 1 Custom Gripper Pack
With 10% discount
Enter Your Details Below and we will send you a non-binding offer for you to review within 24 Hours with instructions on how to accept the offer and order.
Please indicate the Coupon Code we mentioned in the Webinar. It is also sent with our replay link after the end of the webinar, so check your mailbox.
The Promotion is valid from April 15th 2021 to May 31st 2021
[hubspot portal=”19619423″ id=”b60fc7ab-d249-4fb1-86df-632f9dbb1c15″ type=”form”]