.

Power supply

Find in this section everything related to power supply for your robots: charger, batteries, converters, regulators, solar panels... 

Active filters

With the Uninterruptible Power Supply for Raspberry Pi, your board becomes safe and autonomous thanks to a rechargeable-battery system.

In Stock

Provide some power to your electronic projects with this BreadBoard Power Supply 3.3V/1.8V. Easy to insert onto your breadboard power busses, it is both convenient and economical.

In Stock

LiPo batteries 7.4V 1000mAh 2S 20C deliver full capacity and discharge. They are the best value batteries in the market!

In Stock

Rechargeable Pololu battery AA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 2200mAh.

In Stock

Supply your low consumption circuit with this Power-Supply Stick 5V/3.3V. Can be directly plugged in the supply busses line.

In Stock

The iMAX-B6AC can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells

In Stock

Rechargeable Pololu battery AAA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 900mAh.

In Stock

Whether it’s to replace your charger, have an extra charger, or just charge several batteries at once, this NAO battery charger will let you use your NAO programmable humanoid robot even longer! Compatible with NAO version 4, 5 & 6

The Arduino-compatible LiPower board not only acts as a voltage-boosting converter for your lithium polymer battery, but can also serve as a buck-boost regulator or simply an energy harvester!

In Stock

This very compact charger will recharge your one cell LiPo and Li-Ion batteries very quickly. It is powered by a microUSB câble.

In Stock

The 2118 S7V8A Adjustable Voltage Regulator is a small Arduino-compatible module that will produce the output current you need depending on your project and your batteries’ charge level!

In Stock

This charger for one cell LiPo or LiIon batteries will easily be integrated in all you robots to allow a recharging without removing the battery, with a standard USB cable.

In Stock

Allows using 3.3V and 5V logic levels components in the same project

In Stock

This JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.

In Stock

Smoothy convert 3.3V to 5V I2C communications

In Stock

This male JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.

In Stock

This DC-DC voltage converter transforms any DC voltage between 16 and 36V into a 9V voltage with a 5A maximal currant. It is verylight-weight, which is perfectly adapted to portable devices or mobile robots.

In Stock

This Lipo battery, light yet powerful, is the perfect missing block for your mobile robot based on Arduino.

Out-of-Stock

Here is a small yet very handy accessory for your breadboard contraptions. Works with many standard AC/DC converters.

In Stock

The Raspberry Pi 5V–2.5A power supply is an exclusive charger for powering Pi 3 boards not only in Europe, but also Great Britain, Australia and the United States. This power supply is also compatible with the Nvidia Jetson Nano.

In Stock

4 x AA Battery Holder with On/Off Switch that will work very nicely with most of your project that requires a 5V firepower!

In Stock

This DC-DC power module can convert any DC voltage between 3.6 and 25V to another lower DC voltage.

In Stock

Supply easily and efficiency your BreadBoard with 5 or 3.3V directly from USB helped by this Power Supply module

In Stock