Motor controllers
Motors controllers can control the speed, the position or the torque of a motor providing electrical power and adequate signal. Pay attention to the type of controller, the expected features and motor power. Our team is there to advise you, feel free to contact us !
The Roboteq SBL 1360 controller is designed to drive brushless motors equipped with Hall effect sensors up to 60V and 30A.
Let your Sabertooth control and supply two DC motors, a microcontroller and a couple of servos, and your robot will reach new highs in manoeuvrability and autonomy!
Sparkfun has released its version of the DC motor driver based on the famous TB6612FNG circuit, and the result is appealing: you can control 2 DC motors separately or simultaneously in one of 4 function modes!
The Roboteq SBL 1360 A controller allows you to control motors up to 30A and 60V equipped with a Hall effect sensor or with no sensor thanks to a trapezoidal control mode.
Sabertooth 2x32 is a dual channel motor driver capable of supplying 32A to two motors–with peak currents up to 64A. It can be operated from radio control, analogue, TTL serial or USB inputs. It uses regenerative drive and will boost your robot!
A new and improved version of the Easy Driver board, the Big Easy Driver by SparkFun can drive bipolar stepper motors at up to 2 amps per phase.
The Roboteq SBL 2360 controller can drive two brushless DC motors, with or without sensors, in sinusoidal or trapezoidal mode.
Probably one of the best drivers in its class – the Sabertooth 2x 25 A Motor Driver is powerful, versatile, extremely reliable and allows you to control 2 motors at once while recharging your supply batteries!
This dual motor driver from Pololu is based on Freescale’s MC33926 full H-bridge. It has a 5 – 28V operating range and can deliver almost 3A continuously (5A peak) to each of its two motor channels. The dual motor driver works with 3 – 5V logic levels, supports up to 20kHz PWM and has many protections.
The Roboteq SBL 2360 S motor controller ensures continuous, high-quality rotation of brushless DC motors up to 60A and 60V.
The Sabertooth 2x5 motor driver can supply two DC brushed motors with up to 5A each continuously. It’s the perfect solution for small robots!
Version 2.0 of the Adafruit Motor/Stepper/Servo Shield for Arduino Kit
The Roboteq SBL 2396 controller offers a drive system for 2 brushless motors either equipped with a Hall effect sensor or without a sensor.
The Sabertooth family is back with its most ambitious motor driver: 2 x 60A for controlling robots up to 450 kg with the necessary sensitivity!
Simple motor controller PCB to control two 2A motors
This high-power brushed motor controller can drive up to 3 motors simultaneously with a high degree of precision.
Precision navigation, increased autonomy and varied operating modes: the SyRen 10 motor driver is one of the most efficient for medium-sized robots.
This tiny dual motor driver from Pololu carries a TI DRV8833 dual H-bridge. Supplyied with a 2.7 - 10.8 V voltage, it can deliver 1.2A (2A peak) to two DC motors. It integrates protections against reverse-voltage, under-voltage, over-current, and over-temperature.
The Roboteq SDC 2160 2 x 20A-60V controller can drive two brushed motors, offers a precise control of position and speed, and is easy to implement.
The famous SyRen regenerative motor driver is returning in a 25A version: fully secured and highly versatile, it gives you extended control over your robot’s movements.
Are you sure you’re prepared for the full power of the T’Rex? This Arduino-compatible RS036 controller might not look like the Jurassic predator, but it nonetheless offers some quite magnificent possibilities: for example controlling 2 motors at once!
This very compact Roboteq controller allows you to control a brushed DC motor while delivering high power and output voltages.
Put the SyRen 50 motor driver to the test: up to 100A peak, 4 operating modes for controlling velocity or direction, and 100% safe.
A rich and useful board to use on your Rover5 based contraptions.