.

Cables and screws

Having a chassis for your robot is of course important, but you also have to be able to attach boards, motors and sensors and connect all of them. Do not wait and make sure you have all the necessary equipment to wire and build your robot.

Active filters

USB 2 Cable with a length of 1.80 m, A-B type

In Stock
Sale

Pack of 4 short length cables for Lego Mindstorms EV3 robots

In Stock

Connection cable for the IR sharp sensor that are used on the Eddie robot.

In Stock

A set of 40 female-female cables of different colors for standard 0.1" (2.54mm) headers.

In Stock

Set of colored jumper cables with stiff ends molted on for breadboards.

In Stock

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

In Stock

A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.

In Stock

Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!

In Stock

The ServoCity 8 mm screw nut with the .770” pattern is intended to be used with the 8 mm lead screw. Every rotation of the screw moves the nut 8 mm.

In Stock

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

In Stock

The RJ45 ethernet cable (15cm or 6") is a categry 5 cable that will allow you to connect your Raspberry Pi to a computer and start coding straight away!

In Stock

One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!

In Stock

An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!

In Stock

These pan-head screws are ¼” long. They are made of zinc plated steel and come in packs of 25.

In Stock

These pan-head screws are 3/8” long. They are made of zinc plated steel and come in packs of 25.

In Stock

With just one of these Grove Servo Connection Cables, you’ll be able to connect up to 2 servo motors to your Grove base shield.

In Stock

The Grove 4-Pin 50 cm Cables (pack of 5) are designed for point-to-point connections between a Grove module and its Grove base shield, to allow clear, neat, accurate connection!

In Stock

Seeed Studio has put together this pack of 4-Pin 5 cm Cables especially to help you connect modules to your Grove base shield.

In Stock

Want to multiply the number of cables you use in your assemblies? Why not, provided you use the right ones! This pack of five 30-cm long 4-pin cables compatible with the Grove base shield have what it takes to make sure you connect your components in a crystal clear manner – the first step on the road to success!

In Stock

You’ve got projects? We’ve got cables! This pack of five Grove base shield compatible 4-Pin Cables is the perfect choice for ensuring all your projects are successful, whatever the Grove module you choose.

In Stock

Pack of 4 cables of different sizes for robot Lego Mindstorms EV3 or Lego Mindstorms NXT

In Stock

The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.

In Stock

This pack of thirty 3-wire extension cables by Parallax will prove extremely useful when wiring your projects, however big or complex!

In Stock

This set of screws with their compatible screwdriver will enable you to start assembling your structural robot parts.

In Stock