Robotic components (frame/body)

Robotic components to make DIY robots. You will find here all the building parts to assemble your robots (or automation systems): chassis, wheels, cables, beams, screws... Everything you need to build a robust body for your robot is here.

Active filters

The ServoCity Ball Bearing Idler Shaft integrates easily into projects with timing belts.

In Stock

This set of screws with their compatible screwdriver will enable you to start assembling your structural robot parts.

In Stock

This 5V USB to 9V jack power cable ideal for your Marty robot, but it can be used anywhere a 9V source is needed.

In Stock

This is a basic 100 g spool of leaded solder. A must-have!

In Stock

Make sure you always have your favourite cables to hand when prototyping! This hook-up wire spool set of 22 AWG cables in various colours will save you the hassle of looking everywhere for your breadboard cables – they’re all there, stored neatly away, just waiting to be used!

In Stock

InterbotiX WidowX MX-28 Robot Pan & Tiltoffering dual-axis movement thanks to its two Dynamixel MX-28T servo motors (not included)

Product available for orders

1 NXT cable of 10 cm for your Lego Mindstorms NXT robots

In Stock

In Stock

Out-of-Stock

These 12 mm linear ball bearings enable a very smooth motion along rails.

In Stock

This set of 3-side C sliders is fully compatible with Actobotics components.

Out-of-Stock
€473.10 €498.00 -5%

The NEVA Magis 3D Printer is both efficient and child’s play to use. Ideal for beginners, for experienced creators and for all uses!

For any purchase of a Magis Neva, get a 20% discount on our selection of PLA filaments with the code PLA20%!
In Stock

This storage box with multiple compartments will be very useful to put away yout MakerBeam parts. Beams max length: 300mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

Product available for orders

USB Type-A to mini B cable: the most practical for lightweight devices

In Stock

Simple six wire cable with a 10cm length. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

In Stock

This Seeed Studio Mini Soldering Iron is probably one of the most practical currently on the market. It’s both lightweight and portable, and you can accurately control its temperature. The Mini Soldering Iron comes in the form of a small 17 cm-long stylus. The small OLED screen displays the temperature or an alert message if needed, with a high-tech style!

In Stock

InterbotiX Pan & Tilt offering dual-axis movement thanks to its two Dynamixel MX-64T servo motors (not included).

In Stock

1 NXT/EV3 cable of 20 cm for your Lego Mindstorms NXT robots

In Stock

Out-of-Stock