.
Cables and screws
Having a chassis for your robot is of course important, but you also have to be able to attach boards, motors and sensors and connect all of them. Do not wait and make sure you have all the necessary equipment to wire and build your robot.
10 cables (20cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
You’ve got projects? We’ve got cables! This pack of five Grove base shield compatible 4-Pin Cables is the perfect choice for ensuring all your projects are successful, whatever the Grove module you choose.
Set of colored jumper cables with stiff ends molted on for breadboards.
The Grove 4-Pin 50 cm Cables (pack of 5) are designed for point-to-point connections between a Grove module and its Grove base shield, to allow clear, neat, accurate connection!
The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.
A set of 40 female-female cables of different colors for standard 0.1" (2.54mm) headers.
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 160 mm Cables for XL Servos.
10 cables (18cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
Seeed Studio has put together this pack of 4-Pin 5 cm Cables especially to help you connect modules to your Grove base shield.
10 cables (20cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
10 cables (14cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
The RJ45 ethernet cable (15cm or 6") is a categry 5 cable that will allow you to connect your Raspberry Pi to a computer and start coding straight away!
10 cables (10cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 10 cm (4-inch).
10 x 24cm cables with 4 pin connectors for Dynamixel DX, RX and EX series servomotors
Want to multiply the number of cables you use in your assemblies? Why not, provided you use the right ones! This pack of five 30-cm long 4-pin cables compatible with the Grove base shield have what it takes to make sure you connect your components in a crystal clear manner – the first step on the road to success!
