.

Cables and screws

Having a chassis for your robot is of course important, but you also have to be able to attach boards, motors and sensors and connect all of them. Do not wait and make sure you have all the necessary equipment to wire and build your robot.

Active filters

Set of colored jumper cables with stiff ends molted on for breadboards.

In Stock

This pack of thirty 3-wire extension cables by Parallax will prove extremely useful when wiring your projects, however big or complex!

In Stock

3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 10 cm (4-inch).

In Stock

3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 20 cm (8-inch).

In Stock

3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 30 cm (12-inch).

In Stock

Connection cable for the IR sharp sensor that are used on the Eddie robot.

In Stock

The RJ45 ethernet cable (15cm or 6") is a categry 5 cable that will allow you to connect your Raspberry Pi to a computer and start coding straight away!

In Stock

USB 2 Cable with a length of 1.80 m, A-B type

In Stock

The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.

In Stock

An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!

In Stock

One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!

In Stock

Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!

In Stock

A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.

In Stock

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

In Stock

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

In Stock
€13.50

The ServoCity lead screws can be used to convert rotational motion into linear motion, in order to create a particularly efficient mechanical rail.

In Stock

These pan-head screws are ¼” long. They are made of zinc plated steel and come in packs of 25.

In Stock

These pan-head screws are 3/8” long. They are made of zinc plated steel and come in packs of 25.

In Stock

Use this ServoCity nut for a smooth, linear motion on an 8 mm lead screw.

In Stock

The ServoCity 8 mm screw nut with the .770” pattern is intended to be used with the 8 mm lead screw. Every rotation of the screw moves the nut 8 mm.

In Stock

This set of screws with their compatible screwdriver will enable you to start assembling your structural robot parts.

In Stock

This set of Actobotics® structural components version A includes everything you’ll need to assemble your first ServoCity profiles for robots.

In Stock