Active filters

The ServoCity gripper (kit A) offers a large width for holding on to all kinds of objects and is designed for use with any standard size servo.

In Stock

1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

Owning a Raspberry Pi is great, but making the very most of it with the Pi Cobbler add-on and ribbon cable designed for breadboards is even better!

In Stock

This ball bearing with an inner diameter of 25.4 mm is the ideal choice for ensuring the smoothest rotation of your shafts and rails with a compatible outer diameter.

In Stock

The ServoCity robotic gripper (kit B) is easy and quick to assemble. Its design allows for a wide grip of approximately 10.6 cm for grabbing large objects.

In Stock

1 piece of 900mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

With this Dean/Jack adapter cable, you can easily connect a LiPo or Li-ion battery to your project.

In Stock

The 3x3” ServoCity Ball Bearing Turntable will ensure all the parts of your robotics chassis kit rotate nice and smoothly.

In Stock

1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

Swivel any parts you like in your robotics chassis kit with the ServoCity 4x4” Ball Bearing Turntable.

In Stock

ServoCity’s Worm Drive Gearbox offers a 30:1 reduction ratio and a smooth, slow, jerk-free rotational motion.

In Stock

16 pieces of 100mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

Power cable for an LMS111 or TIM551 type Sick laser scanner

Product available for orders

The ServoCity ball bearing turntables come in various sizes and are ideal for easily including a pivot point in your robotics chassis kits.

In Stock

The BM-2100 base mount kit allows you to attach your pan and tilt to almost any flat surface with ease.

In Stock

16 pieces of 100mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

M12 Power cable with 8 pins for an LMS111 Sick laser scanner.

Product available for orders

This "squid" power cable allows you to connect up to 6 devices /modules to a single power supply, without removing the soldering iron.

In Stock

The Direct Drive Pan Mount provides you with a base to which you can fix your SPT200 pan or DDP125 pan & tilt system. It comes in the form of a kit that you’ll need to assemble.

In Stock

6 pieces of 150mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

The Lego Mindstorms EV3 and NXT robots include a great many mechanical and electronic parts, all of them invaluable: with this Pack of 2 Ball-Bearing Mounts for Lego Mindstorms, you’ll never run short of ball-bearings again.

In Stock

The ServoCity 9” Ball Bearing Turntable stands out for its ultra-compact design and its robustness, and rotates very smoothly.

In Stock

The MPT1100-SS is a heavy-duty pan & tilt system delivered assembled and ready to run with its double motor controller.

In Stock

6 pieces of 150mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock