16 pieces of 100mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 1500mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

Bag of 25 T-slot nuts for MakerBeam made of stainless steel, 25 M3 4mm A2 bolts (ISO7380) and 25 M3 4mm A2 bolts (DIN7991). Great to fasten brackets (use the ISO7380 bolts) or corner cubes (use the DIN7991 bolts).
Check out our MakerBeam accessories range.
Compatibility: MakerBeam

8 pieces of 200mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

Bag of 250 square headed bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

Bearings for MakerBeam that comes with 10 bearings, 10 M3 12mm squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts. Bearing thickness: 5mm, outside dimension: 13mm, inside diameter: 3mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam

8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

4 pieces of 300mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

4 pieces of 300mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

Bag of 100 wing type bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 900mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

6 pieces of 150mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

Bag of 100 square headed bolts M3 for MakerBeam, length: 12mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

If you’ve run out of mounts for assembling your beams, you’ll need this set of 12 MakerBeam brackets, compatible with OpenBeam and MakerBeamXL.

These MakerBeam brackets allow you to design robust projects with OpenBeam and MakerBeamXL profiles.

The MakerBeam T bracket can be used in all your projects based on OpenBeam and MakerBeamXL profiles.

Bag of 12 MakerBeam Straight brackets made of stainless steel.
Check out our MakerBeam brackets range.Compatibility: MakerBeam, OpenBeam, MakerBeamXL

6 pieces of 150mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 60mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 60 mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 600mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.