Robotic components (frame/body)
Robotic components to make DIY robots. You will find here all the building parts to assemble your robots (or automation systems): chassis, wheels, cables, beams, screws... Everything you need to build a robust body for your robot is here.
InterbotiX WidowX MX-28 Robot Pan & Tiltoffering dual-axis movement thanks to its two Dynamixel MX-28T servo motors (not included)
InterbotiX Pan & Tilt offering dual-axis movement thanks to its two Dynamixel MX-64T servo motors (not included).
This linear slide rail wil help you to build straight and sturdy MakerBeam constructions. Linear slide rail dimansions: 300mm x 9mm x 6,5mm, carriage dimensions: 29mm x 20mm x 8mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL
These MakerBeam anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam
These MakerBeam black anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam
16 pieces of 100mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
1 piece of 1500mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
8 pieces of 200mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
Bag of 250 square headed bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam
Bearings for MakerBeam that comes with 10 bearings, 10 M3 12mm squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts. Bearing thickness: 5mm, outside dimension: 13mm, inside diameter: 3mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam
4 pieces of 300mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
4 pieces of 300mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
Bag of 100 wing type bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam
1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
1 piece of 900mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
6 pieces of 150mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
6 pieces of 150mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
8 pieces of 60mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
8 pieces of 60 mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
1 piece of 600mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
Bag of 250 regular nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL