Robotic components (frame/body)

Robotic components to make DIY robots. You will find here all the building parts to assemble your robots (or automation systems): chassis, wheels, cables, beams, screws... Everything you need to build a robust body for your robot is here.

Active filters

€6.89

Out-of-Stock
€15.85

Out-of-Stock

A dedicated USB cable/jack to connect your Odroid boards to a USB host.

In Stock

This set of two 1/2” x 1.1/8” ball bearings can be easily integrated into all your robotics chassis projects requiring a high-quality rotation.

In Stock

These ServoCity 1/2” x 3/4” Non-Flanged Ball Bearings are as lightweight as they are efficient for all your robotised rails and rotary axes.

In Stock

The 1/2″ Bearing with Four Thru-Hole Fixation Points (Wide) is a bearing with a wider structure for better meeting your needs.

In Stock

Our range of stainless steel bearings has grown once again with the addition of this pack of two 1/4” x 1/2” rimless ball bearings!

In Stock

In the wide range of bearings available on your website, check out this set of two 1/8” x 1/4” Non-Flanged Ball Bearings in stainless steel.

In Stock

16 pieces of 100mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

16 pieces of 100mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

This 100mm omni ball bearing wheel from Nexus Robotics allows you to design your own omnidirectional robot.

In Stock

This set of 12 mm hex wheel adapters for 4 mm shafts (pack of 2) allows you to attach a wheel equipped with a hexagonal shaft to a motor that has a 4 mm output shaft.

In Stock

3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 30 cm (12-inch).

In Stock

1 piece of 1500mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

6 pieces of 150mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

6 pieces of 150mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

Made of stainless steel, this 1” x 1.245” Ball Bearing will perfectly fit your axes measuring 25.4 mm (1”) in diameter.

In Stock

This stainless steel 1” x 2” Ball Bearing us designed for use with a variety of mounting options on axes measuring 25.4 mm (1”) in diameter.

In Stock

This ball bearing with an inner diameter of 25.4 mm is the ideal choice for ensuring the smoothest rotation of your shafts and rails with a compatible outer diameter.

In Stock

8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

8 pieces of 200mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

In Stock

A comprehensive Guide to learn all 3D printing techniques in only 21 days.

In Stock

These 3 pin couplers will be very useful when converting your jumper wires into home extension wires!

In Stock