Robotic components (frame/body)

Robotic components to make DIY robots. You will find here all the building parts to assemble your robots (or automation systems): chassis, wheels, cables, beams, screws... Everything you need to build a robust body for your robot is here.

Active filters

This accessory stand from Seeed Studio was made for the Mini Soldering Iron. Both are cleverly designed and practical to carry around!

In Stock

These pan-head screws are 3/8” long. They are made of zinc plated steel and come in packs of 25.

In Stock

These pan-head screws are ¼” long. They are made of zinc plated steel and come in packs of 25.

In Stock

This Allen key (2mm) is compatible with all the MakerBeam bolts with a hex hole in the head.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

In Stock

Add a Steampunk touch to your robotics creations with this pack of 4 ServoCity bronze bushings!

Product available for orders

Use the proper bolts for fixing your Dynamixel servos!

In Stock

The Pololu Ball Caster with 1/2” Metal Ball kit comes with everything you need to mount a 12.7 mm diameter caster on your robotic structure.

In Stock

Add a Steampunk touch to your robotics creations with this pack of 4 ServoCity 1/8” bronze bushings!

3 pin Extension cable for servomotors, ultrasound sonar sensor Ping))), LCD screen and all 3 pin sensors. The lenght of the cable is 10 cm (4-inch).

In Stock

A great jumper cable for connecting your programming board to pretty much anything!

In Stock

This pack of 4 durable ServoCity 1/4” bronze bushings is the perfect solution for your steel shafts.

The ServoCity 3/16” bronze bushings come in packs of 4 bushings in varying lengths for different uses.

Use this pack of 4 ServoCity 5/16” bronze bushings with all your steel shafts with a compatible diameter.

The ServoCity 5/8” Ball Castor embeds an omnidirectional mechanism fit for many robotics applications.

In Stock

ServoCity is offering you this 90° angle bracket in aluminium to assemble the various mechanical, electrical or electronic parts of your robot in no time.

In Stock

Simple six wire cable with a 10cm length. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

In Stock

The ServoCity 3/8” bronze bushings come in packs of 4 robotics components of varying lengths.

This 20 jumper wires harness is great for prototyping neatly! If you want, you can also pull the ribbon wires off to make individual jumpers.

In Stock

Our range of stainless steel bearings has grown once again with the addition of this pack of two 1/4” x 1/2” rimless ball bearings!

In Stock

A ServoCity ball bearing of 4.76 mm in diameter for your robotics chassis kit.

In Stock

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

In Stock

These 4 black vinyl end caps will fit tightly around the your beams. They can be easily removed and reused.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam

In Stock

This MakerBeam set includes all the necessary hardware for fixing components using standoffs. Each set allows you to assemble 4 standoffs.

In Stock