List of products by brand Pololu Robotics & Electronics
Here you will find 100:1 DC geared motors, digital infrared proximity sensors Sharp, encoders for micro motors, microcontrollers for servo motors...
This tiny dual motor driver from Pololu carries a TI DRV8833 dual H-bridge. Supplyied with a 2.7 - 10.8 V voltage, it can deliver 1.2A (2A peak) to two DC motors. It integrates protections against reverse-voltage, under-voltage, over-current, and over-temperature.
With the GP2Y0A60SZLF 5V board by Polulu, you get an infrared distance sensor that’s as compact as it’s precise.GP2Y0A60SZLF Analogue Infrared Distance Sensor Board (5V)
The JRK 12v12 motor controller with feedback allow you to command a middle size brushed DC motor with one of the four available interfaces: USB, analog voltage, digital command or radio command. You can also enslave the motor in closed-loop.
This JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.
This male JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.
This dual motor driver from Pololu is based on Freescale’s MC33926 full H-bridge. It has a 5 – 28V operating range and can deliver almost 3A continuously (5A peak) to each of its two motor channels. The dual motor driver works with 3 – 5V logic levels, supports up to 20kHz PWM and has many protections.
The Pololu MinIMU-9 v2 is an inertial measurement unit (IMU) packing an L3GD20 3-axis gyro and an LSM303DLHC 3-axis accelerometer and 3-axis magnetometer on a tiny 23×15 mm board. The nine independent rotation, acceleration, and magnetic measurements can be retrieves by I2C and used to calculate an attitude and heading reference system (AHRS).
A newer version of the MinIMU-9 v2 inertial measurement unit, this MinIMU-9 v3 Sensor will supply your microcontroller with a series of 9 independent speed, rotation, acceleration and magnetic readings enabling you to estimate pitch, roll and yaw in the Arduino environment. DISCONTINUED