.

Dynamixel

Dynamixel is one of the best known brands in the world of personal and educational robotics thanks to its famous digital servo motors. Dynamixel has imposed a full range of solutions from the young age to advanced actuators for researchers and professionals. A brand recommended by Generation Robots!

Active filters

We first presented the new XM430 series by Dynamixel to you when it was in beta testing. The XM430-W350-R servo motor is now available for sale, and its new features won’t disappoint!

In Stock

Alongside the XM430-W350-R, the XM430-W210-R servo is about to change the lives of robotics researchers, teachers and enthusiasts. As you'll be able to see for yourself, you’ll say goodbye to your good old MX-28 servo with no regrets!

In Stock

Use the M3x8 wrench bolts to fix your Dynamixel servos securely.

In Stock

The USB2AX is a small interface to control Dynamixel servomotors like the AX-12 or the MX-28T from a computer.

In Stock

Are you looking for a fast, simple way to connect your Dynamixel servos with an RS485 interface to a USB port? The USB to RS-485 Dynamixel converter supports a data transfer rate up to 3 Mbaud!

In Stock
€32.40

The U2D2 board from Robotis enables you to supply a variety of power sources to your Dynamixel servo motors.

Out-of-Stock

Program many Dynamixel servos directly with the U2D2 Dynamixel/PC connector, for AX/MX to pro series!

In Stock

Support frame for Dynamixel RX-28 actuator

In Stock
€6.60

The SMPS2Dynamixel allows you to power your Dynamixel servomotors if you don't use a controller.

In Stock

The PS-10 SMPS charger allows you to power your Dynamixel controllers and servomotors.

Product available for orders

This set of 5 FP04-F9 side mounting frames is designed for the Bioloid robotics kits by Robotis.

In Stock

Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!

In Stock

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

In Stock

The FP04-F8 frames from Robotis are designed to adapt perfectly to the Dynamixel AX-series servo motors.

In Stock

A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.

In Stock

Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!

In Stock

This set of 10 FP04-F3 side mounting frames is designed for the Bioloid robotics kits by Robotis that use the AX series Dynamixel servomotors.

In Stock

The MX-28T is the new name of the MX-28 Dynamixel servomotor that powers the robot DARwIn-OP. The MX-28T actuator is intelligent and precise.
The MX-28AT is an improvement upon the MX-28T model. "A" stands for "Aluminium", the new aluminium body is now allowing a better heat distribution, and the MX-28AT is also equipped with a new fastening system.

In Stock

Use the proper bolts for fixing your Dynamixel servos!

In Stock

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

In Stock

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

In Stock

Screw this PR05-Horn Spacer on the horn of your AX-12A, AX-12W or AX-18A Dynamixel servomotors horn. This will allow you to fix on top of it Robotis OLLO and Robotis DREAM parts!

In Stock

You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!

In Stock

Need a remote to control your Robotis robotics kit? The RC-100B Remote Control offers you up to 1,023 different command combinations and 3 different communication protocols!

In Stock