.

Dynamixel modules and pieces

All accessories allowing you to power, command and attach Dynamixel servomotors to build mobile robots and robotics arms.

Active filters

This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.

In Stock

The LBC-010 charger for LiPo battery allows to recharge the LBS-10 LiPo battery of the Premium Bioloid kit.

Out-of-Stock

Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!

In Stock
€35.60

The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.

In Stock

A set of ROBOTIS gears specially suited to the Dynamixel MX-28R or MX-28T robot servo motors to prolong your robot’s life.

In Stock

The OpenCM 485 Expansion Board connects to your OpenCM9.04 Controller so you can benefit from additional Dynamixel ports.

In Stock

Exclusive skin for Bioloid robots to give unique personality to your humanoids. These skins can be painted to distinguish your Bioloid robot.

In Stock

The DMS-80 distance sensors offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.

Product available for orders

Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!

In Stock

The CM-150 Controller is used for programming robotics kits like the Robotis Dream Level 2. It will allow you to connect numerous components, for example sensors, gearmotors and LED modules.

In Stock

The PS-10 SMPS charger allows you to power your Dynamixel controllers and servomotors.

In Stock

The Robotis Gear/Bearing Set for the MX-106 servo motor has been designed for the long-lasting replacement of your gear and bearing parts: robustness, endurance, and long life are the keywords here!

In Stock

Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 160 mm Cables for XL Servos.

In Stock

Support set for RX-64, EX-106+, MX-64 and MX-106 Dynamixel servomotors

In Stock

The USB2AX is a small interface to control Dynamixel servomotors like the AX-12 or the MX-28T from a computer.

In Stock

One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!

In Stock

Horn and Bearing HN05-I1 for Dynamixel actuators

In Stock

The 903-0205-000 gear/bearing set is the replacement kit to choose if you want to give your Dynamixel MX-64 servo motor a new lease of life.

In Stock

If you’re a fan of the XL-series Dynamixel servos, you’ll want to check out the OpenCM9.04-C open-source controller, specially designed to support up to 4 such servos.

In Stock
€6.60

The SMPS2Dynamixel allows you to power your Dynamixel servomotors if you don't use a controller.

In Stock

10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.

In Stock

The OpenCM90.4 control board allows you to control all TTL Dynamixel servomotors.

In Stock

Replace the gears of your Dynamixel AX-12A smart actuator using this replacement kit.

In Stock

An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!

In Stock