.

Dynamixel

Dynamixel is one of the best known brands in the world of personal and educational robotics thanks to its famous digital servo motors. Dynamixel has imposed a full range of solutions from the young age to advanced actuators for researchers and professionals. A brand recommended by Generation Robots!

Active filters

250V 5A fuse 10pcs set for CM-5/CM-2+

In Stock

FP04-F11 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

In Stock

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

In Stock

Screw this PR05-Horn Spacer on the horn of your AX-12A, AX-12W or AX-18A Dynamixel servomotors horn. This will allow you to fix on top of it Robotis OLLO and Robotis DREAM parts!

In Stock

FP04-F17 wheel for the Robotis STEM kit. Compatible only with the AX-series Dynamixel servomotors and the OLLO motor and servo. Bolts, nuts (BNS-10) and tire (FP04-F18) are not included. Width: 18mm, diameter: 48mm

In Stock

Use the proper bolts for fixing your Dynamixel servos!

In Stock

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section). This part can be used as a wheel when connected to a AX-12A servomotor.

In Stock

The FP04-F8 frames from Robotis are designed to adapt perfectly to the Dynamixel AX-series servo motors.

In Stock

FP04-F18 wheel for the Robotis STEM kit. Compatible only with the AX-series Dynamixel servomotors and the OLLO motor and servo. the wheel (FP04-F17) is not included. Width: 18mm, diameter: 52mm

In Stock

use this PCB connector to extend your constructions based on Dynamixel actuators

In Stock

FP04-F18 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

This set of 5 FP04-F9 side mounting frames is designed for the Bioloid robotics kits by Robotis.

In Stock

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

In Stock

Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!

In Stock

250V 5A fuse 10pcs set for CM-510, CM-530 and CM-700 controllers

In Stock

Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!

In Stock

Robotis put together this pack of 20 FP04-F55 Dynamixel Cable Holders to more efficiently organise Bioloid robot cables.

In Stock

You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!

In Stock

The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.

In Stock

These 4 x 120 mm 4P cables (for wireless module) are intended exclusively for connecting your Dynamixel servo motors using the RS485 protocol.

In Stock

What could be better than having one Dynamixel servo motor connected to your robot’s main controller? Having even more Dynamixel servos of course! And the Dynamixel 6 Port Power Hub is the perfect solution for powering up to 6 AX or MX servos using the same Dynamixel power hub, with no need for a traditional daisy chain connection.

In Stock