Prototyping

Any design project, whether robotics, purely electronics or linked to connected objects starts by a prototyping. Discover our list of equipment, breadboard, cables to achieve your goals.

Active filters

€130.41 €144.90 -10%

With the Touch Board Starter Kit, take your first steps in a fully interactive world of your imagination and creation!

In Stock

Turn any object into musical keys using a couple of crocodile clips or make any surface interactive with the Touch Board development board. Now the whole world can be part of your electronics projects!

In Stock

If you’re looking for a tiny development board with a 32-bit USB microcontroller to get you rapidly started with the C programming language, then you’ve found it: the Teensy 3.1!

In Stock

This strip of 40 premium M/M jumper wires is great for making neatly organised wire harnesses on a standard pitch (2.54 mm) header.

In Stock

With the strip of 40 premium M/F jumper wires (300 mm), you can connect the GPIO pins on your Raspberry Pi.

In Stock

Stack multiple boards to your Raspberry Pi using this extra lonf stacking header.

In Stock

This 100mm long 4-conductor cable with 1mm JST termination is designed to connect Qwiic enabled components together. It can also be used for other applications.

In Stock

Make your prototyping faster and more reliable!

In Stock

This headers are especially adapted to stack Arduino shields one on another so you can get maximal benefit from the Arduino technology.

In Stock

A set of 40 female-female cables of different colors for standard 0.1" (2.54mm) headers.

In Stock

Set of colored jumper cables with stiff ends molted on for breadboards.

In Stock

This set of 10 30 cm long 3-pin cables is for use with sensors, servomotors and other RobotGeek modules.

In Stock

Create a nice and tidy wire harness for your multiple connections with this 4.5 m 6-wire ribbon cable.

In Stock

4.5 m of 10-wire ribbon cable for neat connections!

In Stock

The Qwiic JST connector - SMD 4-pin adapts to all Qwiic cables and allows you to customise your DIY I2C modules.

In Stock

Connect your Qwiic modules as you see fit with the 50 mm Qwiic cable.

In Stock

Connect your Qwiic components in the blink of an eye with the 200 mm Qwiic cable.

In Stock

This 500 mm long 4-conductor cable with 1mm JST termination is designed to connect Qwiic enabled components together. It can also be used for other applications.

In Stock

A strip of 40 premium male/male jumper wires of 150 mm length for your assemblies. If you don’t want to connect them in strip, no problem, you can detach them to use them individually.

In Stock

This pack of 40 jumper wires will come in handy for making wire harnesses or jumpering between headers on PCB's. Plus, you can also pull them off to use them individually. A must have for your prototyping projects!

In Stock

This 20 jumper wires harness is great for prototyping neatly! If you want, you can also pull the ribbon wires off to make individual jumpers.

In Stock

You can use this 40 jumper wires harness as it is, or you can pull the ribbon wires off to make individual jumpers, pretty cool!

In Stock
€29.95

Add the capacitive super powers of a Bare Conductive Touch Board to your Raspberry Pi with the magical Pi Cap shield!

In Stock

This pack of 50 jumper male-male is a good start to get your prototyping starting!

In Stock