.

Prototyping

Any design project, whether robotics, purely electronics or linked to connected objects starts by a prototyping. Discover our list of equipment, breadboard, cables to achieve your goals.

Active filters

This pack of 40 jumper wires will come in handy for making wire harnesses or jumpering between headers on PCB's. Plus, you can also pull them off to use them individually. A must have for your prototyping projects!

In Stock

These headers will allow you to stack several shields on top of your Arduino R3, Leonardo and new Arduino boards going forward.

In Stock

This 20 jumper wires harness is great for prototyping neatly! If you want, you can also pull the ribbon wires off to make individual jumpers.

In Stock

You can use this 40 jumper wires harness as it is, or you can pull the ribbon wires off to make individual jumpers, pretty cool!

In Stock

Make neatly organised circuits with these female/female 30-cm long jumper wires in various colours!

In Stock

Make your prototyping faster and more reliable!

Out-of-Stock

This 500 mm long 4-conductor cable with 1mm JST termination is designed to connect Qwiic enabled components together. It can also be used for other applications.

In Stock

This 100mm long 4-conductor cable with 1mm JST termination is designed to connect Qwiic enabled components together. It can also be used for other applications.

In Stock

This pair of 12-pin and 16-pin stackable headers makes it possible to plug your Adafruit Feather board into a breadboard or to attach other compatible modules, without soldering.

In Stock

The 4-Pin Female Jumper to Grove 4-Pin Conversion Cable (x 5) will make it easier for you to connect your Grove modules.

In Stock

This strip of 40 premium M/M jumper wires is great for making neatly organised wire harnesses on a standard pitch (2.54 mm) header.

In Stock

With the strip of 40 premium M/F jumper wires (300 mm), you can connect the GPIO pins on your Raspberry Pi.

In Stock

A strip of 40 premium male/male jumper wires of 150 mm length for your assemblies. If you don’t want to connect them in strip, no problem, you can detach them to use them individually.

In Stock

This kit of 140 jumper wires for prototyping includes 10 cables x 14 various lengths.

In Stock

This pack of 10 a multicoloured alligator clips is likely to be the most useful thing on your workbench!

In Stock

This self-adhesive breadboard has 10 columns and 30 rows for all your prototyping operations, without soldering.

In Stock

Connect your Qwiic components in the blink of an eye with the 200 mm Qwiic cable.

In Stock

Connect your Qwiic modules as you see fit with the 50 mm Qwiic cable.

In Stock

The Qwiic JST connector - SMD 4-pin adapts to all Qwiic cables and allows you to customise your DIY I2C modules.

In Stock

4.5 m of 10-wire ribbon cable for neat connections!

In Stock

Create a nice and tidy wire harness for your multiple connections with this 4.5 m 6-wire ribbon cable.

In Stock

This is a 6-pin female JST SH-type connector that works with magnetic encoders.

In Stock

This set of 10 30 cm long 3-pin cables is for use with sensors, servomotors and other RobotGeek modules.

In Stock