Fasteners

Having a chassis for your robot is of course important, but you also have to be able to attach boards, motors and sensors and connect all of them. Do not wait and make sure you have all the necessary equipment to wire and build your robot.

Active filters

The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.

In Stock

An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!

In Stock

One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!

In Stock

Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!

In Stock

A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.

In Stock

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

In Stock

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

In Stock
€13.50

The ServoCity lead screws can be used to convert rotational motion into linear motion, in order to create a particularly efficient mechanical rail.

Product available with different options

In Stock

In Stock

This set of screws with their compatible screwdriver will enable you to start assembling your structural robot parts.

In Stock

This set of Actobotics® structural components version A includes everything you’ll need to assemble your first ServoCity profiles for robots.

In Stock

Bag of 50 cap nuts and their washers for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

In Stock

Bag of 100 wing type bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

In Stock

Bag of 100 square headed bolts M3 for MakerBeam, length: 12mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

In Stock

Bag of 25 square headed bolts M3 for MakerBeam, length: 25mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

In Stock

Bag of 250 square headed bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

In Stock

Bag of 4 knurled nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

In Stock

Bag of 100 DIN 958 M3 self locking nuts for MakerBeam. Very handy as they will not be loosen by vibrations and can be reused!
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

In Stock

Bag of 250 regular nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

In Stock

The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.

In Stock

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

In Stock

You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!

In Stock

Use the M3x8 wrench bolts to fix your Dynamixel servos securely.

In Stock