ODROID-H2

ODROID-H2+

ODROID-H2
| A-000000-04164
End of life product

The Odroid-H2+ board is the latest creation from HardKernel. It features an efficient heat sink and a quad-core, quad-thread processor. It will easily find its place in all your projects, as a motherboard or a development board.

Quantity

Size Chart
x
Size Chart
Payment methods (see T&C)
Debit card
PayPal
Payment by invoice
Wire transfer

ODROID-H2+: meet HardKernel’s Celeron J4105 microcontroller

Released end of last year, ODROID board embarks a processor from the Gemini Lake generation. The Celeron J4105 is a quad-core, quad-thread Intel x86 processor clocked at 1.5-2.5 GHz, with a UHD Graphics 600 unit and 4 MB of N2 cache memory. It generates a thermal design power of 10W, but the on-board heat sink justifies its fan-less design.

Example of use of the ODROID H2 card

Although it may appear lightweight in memory in its out-of-the-box version, it can easily increase its storage capacity up to 32 GB thanks to the DDR4 DIMM, SATA3, SSD SATA and eMMC slots available.

Multiple uses for the new ODROID

Measuring 109 mm long and 43 mm high, this compact board can be easily integrated into all kinds of projects. For instance, you can install it in a custom chassis along with its add-ons.

Technically speaking, the HardKernel ODROID-H2+ microcontroller will satisfy all your needs, whether you want to build a DIY PC or develop various on-board solutions. It offers many connectors for creating multimedia and connected projects.

Technical specifications of the ODROID-H2+ board

  • Processor:
    • Intel Celeron J4105 (14 nm, 10W TDP)
    • Up to 2.5 GHz (single-thread) or 2.3​GHz (multi-thread)
    • 4 MB of N2 cache memory
    • UHD Graphics 600 (Gen9.5 LP GT1 up to 700 Mhz)
    • Fan-less design
  • Memory:
    • 2 x DDR4 SO DIMM slots (1.2V)
    • Dual channel memory support up to 2,400 MT/sec (DDR4-PC19200)
    • 32 GB max. memory capacity
    • DDR3 not supported
  • Storage:
    • 1 eMMC connector (bootable and selectable on BIOS)
    • 2 SATA3 6 Gbps
    • 1 M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
    • M.2 SATA SSD not supported
  • Networking:
    • 2 x 2.5GbE LAN ports (RJ45, supports 10/100/2,500 Mbps)
    • Realtek RTL8125B
    • Supports Wake-On-Lan
    • LED indicators (green: link, amber: traffic)
  • Video:
    • 1 DisplayPort 1.2 (up to 4K@60 Hz)
    • 1 HDMI 2.0 (up to 4K@60 Hz)
    • Dual simultaneous display support
  • Audio:
    • 1 Audio out (3.5 mm jack)
    • 1 Audio in (3.5 mm jack)
    • 1 SPDIF out (ALC662, HDA codec)
  • External I/Os:
    • 2 USB 3.0 host ports
    • 2 USB 2.0 host ports
    • 1 peripheral expansion header (20-pin, 2.54 mm pitch)
    • 1 x DC 5V, 1 x DC 3.3V, 5 x GND
    • 2 x UART (TXD/RXD/RTS/CTS)
    • 2 x I2C (SCL/SDA)
    • 1 external power button
    • 3.3V I/O signal level
  • Other features:
    • Passive heat sink
    • BIOS backup battery
    • Maintains system time and BIOS settings
    • Power button
    • Reset button
    • System LED indicators:
      • Red (PWR): solid light when DC power is supplied
      • Blue (left, ALIVE): solid light when system is running
      • Blue (right, RESET): when the RESET button is pressed
      • Amber (SATA): flashes when there is data transfer
      • Green (NVMe): flashes when there is data transfer
  • Active cooling fan connector (5V 4-pin, PWM input + TACHO output)
  • Active cooling fan is optional
  • Connector (4-pin, 1.25 mm pitch)
  • Power:
    • 1 DC jack: outer (negative) diameter 5.5 mm, inner (positive) diameter 2.1 mm
    • DC 14V ~ 20V (up to 60W)
    • DC 15V/4A power adaptor is recommended
    • Energy consumption: IDLE: W4W
    • CPU stress: W14W
    • CPU+GPU stress: W22W
    • Power-off: ≃0,5W

Resources of Odroid H2+ card

Customers who viewed this item also viewed