VIEWED PRODUCTS

List of products by brand Pololu Robotics & Electronics

Here you will find 100:1 DC geared motors, digital infrared proximity sensors Sharp, encoders for micro motors, microcontrollers for servo motors...

Presented here in its fully-assembled version, the Mini Maestro 18 USB Servo Controller is characterised by its versatility and great performance.

In Stock

The Pololu MinIMU-9 v2 is an inertial measurement unit (IMU) packing an L3GD20 3-axis gyro and an LSM303DLHC 3-axis accelerometer and 3-axis magnetometer on a tiny 23×15 mm board. The nine independent rotation, acceleration, and magnetic measurements can be retrieves by I2C and used to calculate an attitude and heading reference system (AHRS).

A newer version of the MinIMU-9 v2 inertial measurement unit, this MinIMU-9 v3 Sensor will supply your microcontroller with a series of 9 independent speed, rotation, acceleration and magnetic readings enabling you to estimate pitch, roll and yaw in the Arduino environment. DISCONTINUED

The MinIMU-9 v5 Gyro, Accelerometer and Compass is an inertial measurement unit with three complete navigation instruments embedded on a single breadboard.

In Stock
Price upon request

Want to use your favourite MP3 tracks in your next electronic project? Thanks to the MP3 Trigger, an easily integrated and programmed audio module, there’s no longer anything holding you back! DISCONTINUED ARTICLE.

This Optical Encoder Pair Kit for Micro Metal Gearmotors is designed for fitting to the rear of Polulu micro metal gearmotors with extended back shafts. You also get two pairs of toothed wheels in different dimensions, so you can choose your resolution.

In Stock

This pair of optical encoders for Pololu 3.3V micro metal gearmotors is compatible with all LP, MP and HP micro metal gearmotors that have an extended output shaft.

In Stock

This pack of 50 jumper male-male is a good start to get your prototyping starting!

In Stock

This pair of magnetic encoders uses a Hall effect sensor for conveying a digital signal to your microcontroller.

In Stock

The Pololu Pair of 20D Micro Metal Gearmotor Brackets allows you to fix your micro metal gearmotor in various positions thanks to its numerous mounting holes.

In Stock

This Pair of 32 x 7 mm Wheels for DIY Mobile Robots can be effortlessly adapted for use on many types of Pololu motors, including its metal gear motor model!

In Stock

Use this pair of magnetic encoders for your Pololu 20D micro metal gearmotors.

In Stock

With this pair of Pololu 12 CPR, 2.7–18V magnetic encoders for micro metal gearmotors, you can equip your micro metal gearmotors with quadrature encoders with Hall effect sensors and a magnetic disc. They are designed specifically for Pololu micro metal gearmotors that have an extended back shaft.

In Stock

This 3-pin cable is 100% compatible with the Sharp GP2Y0A51 analog distance sensor.

DISCONTINUED
Price upon request

3pi is a mini mobile robot with two micro motors, sensors and a LCD screen, all controlled by an ATMega328 microcontroller programmed in C. DISCONTINUED

This Pololu 99:1 25Dx54L mm HP 12V DC motor with a 48 CPR encoder is extremely powerful and ultra-compact!

DISCONTINUED

Not sure which wheels to choose for your next mobile platform? The Pololu Aluminium Wheel Adapter for 6 mm Shaft will open up a whole new range of possibilities!

In Stock

The Pololu Ball Caster with 1/2” Metal Ball kit comes with everything you need to mount a 12.7 mm diameter caster on your robotic structure.

In Stock

Need to rapidly equip your project with an obstacle detector? This compact digital distance sensor will detect anything at a distance of up to 10 cm that might impede your vehicle’s journey.

In Stock

This small digital distance sensor, compatible with most microcontrollers, can locate obstacles up to 15 cm away.

In Stock

This small Pololu distance sensor uses LiDAR technology to locate obstacles at a distance of 5 cm or less.

In Stock

Attach your Pololu motor nice and safely with the Pololu Machined Aluminium Bracket for 37D mm Metal Gearmotors!

In Stock

The Pololu Metal DC Gearmotor 25Dx52L 34:1 with encoder is a compact gearmotor made of a powerful direct current motor, a 34:1 gear reductor that can reach a rotation speed of 285 RPM with a torque of 4.3 kg cm, and a high precision encoder that provides 1633 counts per turn of the output shaft. DISCONTINUED

The Pololu Metal DC Gearmotor 25Dx52L 47:1 with encoder is a compact gearmotor made of a powerful direct current motor, a 47:1 gear reductor that can reach a rotation speed of 120 RPM with a torque of 4,7 kg/cm, and a high precision encoder that provides 2249 counts per turn of the output shaft.

DISCONTINUED