VIEWED PRODUCTS

List of products by brand Adafruit Industries

Adafruit, located in the heart of NYC, was founded by MIT engineer Limor "Ladyada" Fried, who was recently awarded Entrepreneur magazine's Entrepreneur of the year.

The brand has a wide offer of small modules for Arduino and Raspberry boards, and has a great community who shares tutorials and great tips!

The BMP183 is the next-generation of versatile sensors from Bosch, able to measure pressure, altitude and temperature at the same time!

DISCONTINUED ARTICLE.

This pair of 12-pin and 16-pin stackable headers makes it possible to plug your Adafruit Feather board into a breadboard or to attach other compatible modules, without soldering.

In Stock

Stack multiple boards to your Raspberry Pi using this extra lonf stacking header.

In Stock

Your Raspberry Pi 3 opens up a whole world of programming possibilities, but it can run a little hot. With this Raspberry Pi heat sink, it will keep working at its best!

In Stock

This headers are especially adapted to stack Arduino shields one on another so you can get maximal benefit from the Arduino technology.

In Stock

What if you swapped your good old 150-mm Raspberry Pi camera ribbon cable for a slightly longer, but just as effective ribbon cable? The 200-mm Flex Cable sold by Adafruit will help you take a step back!

In Stock

This 20 jumper wires harness is great for prototyping neatly! If you want, you can also pull the ribbon wires off to make individual jumpers.

In Stock

2x13 pin Raspberry Pi compatible ribbon cable. Allow you using all the Raspberry Pi GPIOs (I2C, SPI,...)

In Stock

There can be no doubt about it, the 40-pin GPIO Ribbon Cable will quickly become your best friend for discovering all the possibilities of your Raspberry Pi A+, B+ or Raspberry Pi2 Model B!

In Stock

What if you swapped your good old 150-mm Raspberry Pi camera ribbon cable for a slightly longer, but just as effective ribbon cable? The 610-mm Flex Cable sold by Adafruit will help you take a step back!

In Stock

Use this simple compatible extension cable to equip your Arduino project with an on/off switch.

In Stock

What if you swapped your good old 150-mm Raspberry Pi camera ribbon cable for a slightly longer, but just as effective ribbon cable? The 300-mm Flex Cable sold by Adafruit will help you take a step back!

In Stock

Smoothy convert 3.3V to 5V I2C communications

In Stock

Transform your Arduino home project into a nomadic project with this 9V battery holder.

In Stock

This 5 x AA battery holder is the ideal choice for powering your projects on Arduino or any other compatible board.

In Stock

A robust and full-featured case for your Raspberry board. DISCONTINUED ARTICLE.

This pack of 40 jumper wires will come in handy for making wire harnesses or jumpering between headers on PCB's. Plus, you can also pull them off to use them individually. A must have for your prototyping projects!

In Stock

You can use this 40 jumper wires harness as it is, or you can pull the ribbon wires off to make individual jumpers, pretty cool!

In Stock

Set of 40 jumper wires with male header contacts on either end for connecting PCBs.

In Stock

A set of 40 female-female cables of different colors for standard 0.1" (2.54mm) headers.

In Stock

The 830-Point Breadboard offers all the space and tie points you need for small and medium-sized prototypes.

In Stock

This digital to analog converter receives a values from your microcontroller in I2C and transforms it into a corresponding analog voltage. This is very useful for audio or analog projects.

In Stock

These headers with the standard steps of 0.1" (2.54mm) allow you to connect different PCB or components, to access debug pins or to use breadboards.

In Stock