List of products by brand ServoCity
Servocity is an extensive and high quality range of mechanical components (motors, servomotors, gearboxes, frames…). If you want to start building your own robot from scratch, this brand will be the first you need to look at! Founded in 1994, ServoCity is the online leader in mechanical components for use in robotics, animatronics, prototyping, industrial projects, etc.
The ServoCity part you are looking for is not here? Send us a message, as all of them are part of our catalogue!
This set of two 1/2” x 1.1/8” ball bearings can be easily integrated into all your robotics chassis projects requiring a high-quality rotation.
These ServoCity 1/2” x 3/4” Non-Flanged Ball Bearings are as lightweight as they are efficient for all your robotised rails and rotary axes.
The 1/2″ Bearing with Four Thru-Hole Fixation Points belongs to the vast ServoCity bearing range available on our website.
The 1/2″ Bearing with Four Thru-Hole Fixation Points (Wide) is a bearing with a wider structure for better meeting your needs.
The ServoCity 1/4” x 1/2” Ball Bearing is the ideal component for a well-oiled creation!
Our range of stainless steel bearings has grown once again with the addition of this pack of two 1/4” x 1/2” rimless ball bearings!
Go for a smooth rotation with the 1/4” x 3/8” (6.35 x 9.535 mm) Ball Bearing!
At Génération Robots, we offer a very wide range of ball bearings. So let’s get started with this pack of two 1/4” x 3/8” rimless ball bearings!
Create a solid base for your robotics chassis kit with this 1/4″ Bearing with Four Side Fixation Points!
This pack of two 1/8” x 1/4” ball bearings is designed to ensure the frictionless rotation of the shaft to which it’s attached.
In the wide range of bearings available on your website, check out this set of two 1/8” x 1/4” Non-Flanged Ball Bearings in stainless steel.
This 1/8” x 3/8” Ball Bearing adapts to many configurations, including your outdoor mobile robot project.
Make good use of this 1/8” x 5/16” Ball Bearing with your next robotics chassis kit!
The 12 mm ServoCity Bearing with Four Side Fixation Points is designed to allow any shaft that it holds to rotate smoothly.
Made of stainless steel, this 1” x 1.245” Ball Bearing will perfectly fit your axes measuring 25.4 mm (1”) in diameter.
This stainless steel 1” x 2” Ball Bearing us designed for use with a variety of mounting options on axes measuring 25.4 mm (1”) in diameter.
This ball bearing with an inner diameter of 25.4 mm is the ideal choice for ensuring the smoothest rotation of your shafts and rails with a compatible outer diameter.
The 26 RPM Premium Planetary Gear Motor with ServoCity encoder is a DC planetary gear motor equipped with a magnetic Hall effect encoder.
Start your robotics course or workshop with this omnidirectional 3-wheel chassis from Actobotis, very easy to assemble and reconfigure with other components.
This set of two 3/16” x 3/8” ball bearings can be used in many projects, including outdoor mobile robots.
A ServoCity ball bearing of 4.76 mm in diameter for your robotics chassis kit.
A high-quality ServoCity ball bearing for all kinds of projects.
This set of 2 ServoCity 3/16” x 5/16” Non-Flanged Ball Bearings made of stainless steel is designed for use with a rotary shaft of 4.76 mm (3/16”) in diameter.
These ServoCity 3/4” x 1” Non-Flanged Ball Bearings combine lightweight, strength and efficiency.