Power supply

Find in this section everything related to power supply for your robots: charger, batteries, converters, regulators, solar panels... 

Active filters

This battery is compatible with TurtleBot3 and Robotis OP robots and incorporates a protection system.

In Stock

Wall charger to charge up to 10 USB devices at the same time.

In Stock

This Dual-Port USB Charger Adapter can power a wide variety of devices thanks to its two female USB ports.

In Stock

This 2000 mAh power bank is ideal to charge many devices while you're on the go, such as: iPhone®, iPad®, tablets, smartphones, MP3 players, iPod®, cameras, video game console or Bluetooth® speakers.

In Stock

Something’s happened to your battery charger or your Crazyflie 2.1 drone LiPo battery? Don’t panic, these spare parts will come to your rescue!

Out-of-Stock

Need a max. voltage of 3.3 V for your programming board or sensor? This buck regulator by Pololu takes an input voltage of up to 50 V and reduces it to a voltage and continuous output current of 3.3 V and 3.6 A.

In Stock

Add this 4 AA battery holder to your project and increase its autonomy!

In Stock

Smoothy convert 3.3V to 5V I2C communications

In Stock

4 x AA Battery Holder with On/Off Switch that will work very nicely with most of your project that requires a 5V firepower!

In Stock

A 4-port USB charger for use with all your USB-powered devices, with up to 2.4A per port. Ideal for charging your little tribe of educational robots!

In Stock

This DC-DC voltage converter transforms any DC voltage between 16 and 36V into a 9V voltage with a 5A maximal currant. It is verylight-weight, which is perfectly adapted to portable devices or mobile robots.

In Stock

Battery holder with NXT mount.

In Stock

DISCONTINUED PRODUCT

The Raspberry Pi 5V–2.5A power supply is an exclusive charger for powering Pi 3 boards not only in Europe, but also Great Britain, Australia and the United States. This power supply is also compatible with the Nvidia Jetson Nano.

In Stock

We can always do with an additional power supply, in particular given the huge range of projects possible on the Odroid XU4 and the NVIDIA Jetson Nano Developer Kit.

In Stock

A 5V/2A charger for U3/1/C1+/C0/C2 Odroid boards, compatible with UE type plugs.

In Stock

The D36V28F5 voltage regulator is marketed by the Pololu brand. It provides a regulated output voltage of 5 V from an input source of up to 50 V.

In Stock

This "squid" power cable allows you to connect up to 6 devices /modules to a single power supply, without removing the soldering iron.

In Stock

This battery holder is designed to hold 6 AA batteries. It has NXT compatible mounting to integrate it into your NXT contraption easily.

In Stock

This 6-port charger will allow you to quickly charge up to 6 Thymio robots. You'll only need 1 or 2 hours to have fully operational robots. Very handy if you're teaching an all-day class or if you have back-to-back workshops.

In Stock

A power adapter for the Pixl and Arduino boards, used to control the XL-320 servomotors and power up the Raspberry Pi that made up the Poppy Ergo Jr robot (or any other robot using these servos!)

In Stock

Allows using 3.3V and 5V logic levels components in the same project

In Stock

Transform your Arduino home project into a nomadic project with this 9V battery holder.

In Stock