Power supply

Find in this section everything related to power supply for your robots: charger, batteries, converters, regulators, solar panels... 

Active filters

This charger for one cell LiPo or LiIon batteries will easily be integrated in all you robots to allow a recharging without removing the battery, with a standard USB cable.

In Stock

This multifunctional USB battery charger can support up to 4 Li-Ion or Ni-MH batteries. It tells you the selected current and the selected output voltage as well as extensive information on the charging process.

In Stock

Build your own Qi charging system with the Universal Qi Wireless Charging Transmitter!

In Stock

Build your own Qi charging system with the Universal 85 mm Reverse Micro USB QI Wireless Charging Module by Adafruit!

In Stock

Build your own Qi charging system with the Universal 85 mm Micro USB QI Wireless Charging Module by Adafruit!

In Stock

In need of a power supply delivering a constant 5V output for your electronic projects? The Buck-Type Step-Down Converter proposed here by Adafruit is an alternative power source that’s not at risk of overheating!

In Stock

Sunny Buddy: the Maximum Power Point Tracking (MPPT) solar charger that will add a splash of sunshine to your rechargeable single-cell LiPo batteries!

In Stock

Switching from 5V to 3.3V and from 3.3V to 5V easily and rapidly to increase the range of devices compatible with your system has never been simpler – all you have to do is use the Bi-Directional Logic Level Converter by SparkFun!

In Stock

With the Uninterruptible Power Supply for Raspberry Pi, your board becomes safe and autonomous thanks to a rechargeable-battery system.

In Stock

Samsung INR18650-25R 2500mAh battery for your electronic projects

In Stock

The 2118 S7V8A Adjustable Voltage Regulator is a small Arduino-compatible module that will produce the output current you need depending on your project and your batteries’ charge level!

In Stock
€109.00

Small in size but BIG on quality, the SRC-012A-12AB Rotary Slip Rings can be incorporated into any system requiring this type of transmission.

In Stock

The RoboPad wireless system offers a charging solution for automated robots and vehicles. It is composed of a fixed base and a mobile collector.

Out-of-Stock

Rechargeable Pololu battery AAA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 900mAh.

In Stock

Rechargeable Pololu battery AA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 2200mAh.

Out-of-Stock

The Arduino-compatible LiPower board not only acts as a voltage-boosting converter for your lithium polymer battery, but can also serve as a buck-boost regulator or simply an energy harvester!

Out-of-Stock

This tiny regulator transforms an input voltage of up to 38 V into an output voltage of 5 V, with a stable output current of 5 A.

In Stock

Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.

In Stock

Power up your 7.4V Li-Ion batteries with this charger! (item may differ from photograph )

Product available for orders

This very compact charger will recharge your one cell LiPo and Li-Ion batteries very quickly. It is powered by a microUSB câble.

In Stock

LiPo batteries 7.4V 1000mAh 2S 20C deliver full capacity and discharge. They are the best value batteries in the market!

In Stock

Need to work a little longer on your new robotics project developed using the Robotis Engineer kit? This additional (and compatible) LiPo battery will give you a few extra hours!

In Stock

This 1,800 mAh LIPO battery is the perfect choice for charging your TurtleBot 3, Robotis OP3 or DARwin-OP robot. It incorporates a PCM specially designed to protect the battery.

In Stock

Power the servos and motors of your robotic arms and all-terrain creations nice and simply thanks to this Li-ion Battery, 7.4V 2,200 mAh with PCM!

In Stock