Power supply

Find in this section everything related to power supply for your robots: charger, batteries, converters, regulators, solar panels... 

Active filters

Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.

In Stock

We can always do with an additional power supply, in particular given the huge range of projects possible on the Odroid XU4 and the NVIDIA Jetson Nano Developer Kit.

In Stock

Rechargeable Pololu battery AA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 2200mAh.

Out-of-Stock

Switching from 5V to 3.3V and from 3.3V to 5V easily and rapidly to increase the range of devices compatible with your system has never been simpler – all you have to do is use the Bi-Directional Logic Level Converter by SparkFun!

In Stock

A power adapter for the Pixl and Arduino boards, used to control the XL-320 servomotors and power up the Raspberry Pi that made up the Poppy Ergo Jr robot (or any other robot using these servos!)

In Stock

This 1,800 mAh LIPO battery is the perfect choice for charging your TurtleBot 3, Robotis OP3 or DARwin-OP robot. It incorporates a PCM specially designed to protect the battery.

In Stock

In need of a power supply delivering a constant 5V output for your electronic projects? The Buck-Type Step-Down Converter proposed here by Adafruit is an alternative power source that’s not at risk of overheating!

In Stock

This battery holder is designed to hold 6 AA batteries. It has NXT compatible mounting to integrate it into your NXT contraption easily.

In Stock

Use a single power supply for all your projects? It’s now possible thanks to the adjustable DC/DC Power Converter (1.25V - 35V/3A).

In Stock

This compact charger is a perfect tool for your Thymio 2 robot or any other robot that needs 1A to be charged on USB.

In Stock

Smoothy convert 3.3V to 5V I2C communications

In Stock

The 2118 S7V8A Adjustable Voltage Regulator is a small Arduino-compatible module that will produce the output current you need depending on your project and your batteries’ charge level!

In Stock

This DC-DC power module can convert any DC voltage between 3.6 and 25V to another lower DC voltage.

In Stock

Rechargeable Pololu battery AAA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 900mAh.

In Stock

The Raspberry Pi 5V–2.5A power supply is an exclusive charger for powering Pi 3 boards not only in Europe, but also Great Britain, Australia and the United States. This power supply is also compatible with the Nvidia Jetson Nano.

In Stock

This charger for one cell LiPo or LiIon batteries will easily be integrated in all you robots to allow a recharging without removing the battery, with a standard USB cable.

In Stock

Allows using 3.3V and 5V logic levels components in the same project

In Stock

LiPo batteries 7.4V 1000mAh 2S 20C deliver full capacity and discharge. They are the best value batteries in the market!

In Stock

Power up your 7.4V Li-Ion batteries with this charger! (item may differ from photograph )

Product available for orders

Battery holder with NXT mount.

In Stock

In order to power the WildThumper robot and to protect its electronic circuits

In Stock

4 x AA Battery Holder with On/Off Switch that will work very nicely with most of your project that requires a 5V firepower!

In Stock

A 5V/2A charger for U3/1/C1+/C0/C2 Odroid boards, compatible with UE type plugs.

In Stock