converters and regulators
Master the voltage and power levels on your robot through this list of converters and regulators. Power consumption is always a crucial point when designing a robot.
Female shorting links for use with a 0.64 mm² header.
Provide some power to your electronic projects with this BreadBoard Power Supply 3.3V/1.8V. Easy to insert onto your breadboard power busses, it is both convenient and economical.
Supply your low consumption circuit with this Power-Supply Stick 5V/3.3V. Can be directly plugged in the supply busses line.
The 2118 S7V8A Adjustable Voltage Regulator is a small Arduino-compatible module that will produce the output current you need depending on your project and your batteries’ charge level!
Allows using 3.3V and 5V logic levels components in the same project
Smoothy convert 3.3V to 5V I2C communications
Supply easily and efficiency your BreadBoard with 5 or 3.3V directly from USB helped by this Power Supply module
Recycle an old computer power supply into an efficient bench tool to power your projects? You can do it with the POW06271M ATX Breakout Board!
Sunny Buddy: the Maximum Power Point Tracking (MPPT) solar charger that will add a splash of sunshine to your rechargeable single-cell LiPo batteries!
In order to power the WildThumper robot and to protect its electronic circuits
Switching from 5V to 3.3V and from 3.3V to 5V easily and rapidly to increase the range of devices compatible with your system has never been simpler – all you have to do is use the Bi-Directional Logic Level Converter by SparkFun!
The Polulu voltage regulator is a buck converter generating fixed output voltages and currents, regardless of the input values.
This analog voltage divider allows a 25V (max) voltage to be divided by 5. The output voltage is therefore 5V, making this module a great addition if you often work with Arduino boards!
With the adjustable DC/DC power converter (1V–12V/1.5A), you no longer need to worry about using the right input voltage!
The Grove Voltage Divider acts as an interface between your module and your Grove Base Shield, to measure an analogue voltage or divide an input voltage by 3 or 10.
Use a single power supply for all your projects? It’s now possible thanks to the adjustable DC/DC Power Converter (1.25V - 35V/3A).
This tiny regulator transforms an input voltage of up to 38 V into an output voltage of 5 V, with a stable output current of 5 A.
The D36V28F5 voltage regulator is marketed by the Pololu brand. It provides a regulated output voltage of 5 V from an input source of up to 50 V.
Need a max. voltage of 3.3 V for your programming board or sensor? This buck regulator by Pololu takes an input voltage of up to 50 V and reduces it to a voltage and continuous output current of 3.3 V and 3.6 A.