Good news for all Raspberry Pi enthusiasts: the Raspberry Pi Zero WH board offers all the features of a Pi Zero, plus an already soldered GPIO 40-pin header!
This case is designed to protect your precious little Raspberry Pi 3 from accidents, while remaining very practical for making the most of your programming board.
4 cables (400m length) with 5 pin connectors for some Dynamixel servomotors, sensors and controllers (CM-100, CM-150, CM-530, CM-700).
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
To celebrate its 4th birthday, the Raspberry Pi Foundation is releasing the Raspberry Pi 3! It’s 50% more powerful than the previous version, but above all comes already equipped with WiFi and Bluetooth! It's also compatible with the Pi2 accessories.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 160 mm Cables for XL Servos.
The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
Power cable for an LMS111 or TIM551 type Sick laser scanner
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.