Batteries for robots
Power your robots through our choice of batteries.
LiPo batteries 7.4V 1000mAh 2S 20C deliver full capacity and discharge. They are the best value batteries in the market!
Rechargeable Pololu battery AA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 2200mAh.
Rechargeable Pololu battery AAA NiMH for mobile robots. Provides a 1.2V voltage with a capacity of 900mAh.
This JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.
This male JST RCY connectors (also known as BEC) will be used with battery packs for RC applications. Useful for your drones projects involving batteries with bare wires (22- to 28-AWG wires). The connector is keyed so that power cannot be reversed.
4 x AA Battery Holder with On/Off Switch that will work very nicely with most of your project that requires a 5V firepower!
This 1,800 mAh LIPO battery is the perfect choice for charging your TurtleBot 3, Robotis OP3 or DARwin-OP robot. It incorporates a PCM specially designed to protect the battery.
Power the servos and motors of your robotic arms and all-terrain creations nice and simply thanks to this Li-ion Battery, 7.4V 2,200 mAh with PCM!
This external battery pack can do much more than charging your smartphone. It can power your Raspberry Pi or Jetson Nano on the go!
This battery is compatible with TurtleBot3 and Robotis OP robots and incorporates a protection system.
This 18650 Li-Ion battery allows you to power your projects on Arduino, including the most energy-hungry ones.
This battery holder is designed to hold 6 AA batteries. It has NXT compatible mounting to integrate it into your NXT contraption easily.
This holder for 3 x 18650 batteries with jack plug is dedicated to Arduino users looking for a portable power supply.
Transform your Arduino home project into a nomadic project with this 9V battery holder.
Make sure you have an extra Leo Rover battery in case you need a back-up power supply for your mobile robot!
Add this 4 AA battery holder to your project and increase its autonomy!
Something’s happened to your battery charger or your Crazyflie 2.1 drone LiPo battery? Don’t panic, these spare parts will come to your rescue!
Need to work a little longer on your new robotics project developed using the Robotis Engineer kit? This additional (and compatible) LiPo battery will give you a few extra hours!
The Aliengo robot dog battery provides up to 4.5 hours of autonomy for all the routine operations carried out by your four-legged mobile platform.
Extend the life of your Unitree Robotics Go 1 Quadruped Robot by adding an extra battery!