5V 2.5A power supply for Raspberry Pi 2/3B/3B+ and Nvidia Jetson Nano

Raspberry Pi | A-000000-01723

The Raspberry Pi 5V–2.5A power supply is an exclusive charger for powering Pi 3 boards not only in Europe, but also Great Britain, Australia and the United States. This power supply is also compatible with the Nvidia Jetson Nano.

€12.50

^{Tax included}

Including €0.05 for ecotax

Quantity 22 Available

Get a quote online

Obtenez votre devis en 3 étapes !

1. Ajoutez les articles qui vous intéressent dans votre panier

2. Rendez-vous sur votre panier

3. Cliquez sur OBTENIR UN DEVIS

Your quotations are available online on your customer account.

Size Chart

Wishlist

Description

An international Raspberry Pi and NVIDIA Nano power supply

Electrical standards vary from one country to another – if you’re a Raspberry Pi or NVIDIA Nano fan and a born traveller, don’t forget that the charger you use for your French Raspberry Pi will be of no use in the Antipodes or America! This Raspberry Pi 3 power supply has interchangeable mains adapters, chosen according to the country you’re visiting. The power supply offers protection from electrical incidents and is energy efficient.

Technical specifications of the 5V-2.5A Power Supply for Raspberry Pi 3 and NVIDIA Nano

2.5A, 5.1V power supply
1.5 m cable
Short-circuit, over-current and over-voltage protection
Low standby current consumption
Class II double insulated
Dimensions: 73.2 x 45.1 x 35.1 mm
Weight: 150 g
Input voltage: 90 to 264 Vac
Output voltage: 5.1V
Output current: 2.5A
Input connector: socket
Output connector: micro USB
Power: 13W
Ripple and noise < 120 mV
Minimum temperature: 0 °C
Energy efficiency level: VI
Efficiency: 80.86%
Line regulation: ±2%
Input frequency range: 47 to 63 Hz
Application: official Raspberry Pi power supply, also compatible with the NVIDIA Nano board
MTBF: 50,000 h
Maximum input current: 500 mA
Maximum temperature: +40 °C