Bag of 100 wing type bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

Bag of 250 square headed bolts M3 for MakerBeam, length: 6mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

Bag of 25 square headed bolts M3 for MakerBeam, length: 25mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

Bearings for MakerBeam that comes with 10 bearings, 10 M3 12mm squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts. Bearing thickness: 5mm, outside dimension: 13mm, inside diameter: 3mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam

These 4 black vinyl end caps will fit tightly around the your beams. They can be easily removed and reused.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam

This micro stepper motor bracket is a 3D printed bracket designed for MakerBeam. It also incudes 2 M3 bolts 6mm, 2 M3 bolts 12mm and 4 nuts.
Check out our MakerBeam brackets range. Compatibility: MakerBeam

This flat micro stepper motor bracket is designed in lasercut opaque perspex. It includes 4 M3 bolts 6mm and 4 nuts.
Check out our MakerBeam brackets range. Compatibility: MakerBeam

1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 1500mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 900mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

1 piece of 600mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

4 pieces of 300mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 200mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

6 pieces of 150mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

16 pieces of 100mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 40mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 60mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 40mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

These MakerBeam black anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam

InterbotiX Pan & Tilt offering dual-axis movement thanks to its two Dynamixel MX-64T servo motors (not included).

InterbotiX WidowX MX-28 Robot Pan & Tiltoffering dual-axis movement thanks to its two Dynamixel MX-28T servo motors (not included)