.

Dynamixel mounting plates, horns and bearing

You will find here the appropriate parts to tightly fix your Dynamixel actuators to the robot’s frame.

Active filters

This kit includes 10 FP04-F1 type plastic components, compatible with Dynamixel servomotors of the AX-range.

In Stock

FP04-F11 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section). This part can be used as a wheel when connected to a AX-12A servomotor.

In Stock

FP04-F17 wheel for the Robotis STEM kit. Compatible only with the AX-series Dynamixel servomotors and the OLLO motor and servo. Bolts, nuts (BNS-10) and tire (FP04-F18) are not included. Width: 18mm, diameter: 48mm

In Stock

FP04-F18 wheel for the Robotis STEM kit. Compatible only with the AX-series Dynamixel servomotors and the OLLO motor and servo. the wheel (FP04-F17) is not included. Width: 18mm, diameter: 52mm

In Stock

In this set, you’ll find 10 sturdy plastic structural components for Dynamixel AX servo motors, suitable for replacing components in Bioloid robots.

In Stock

FP04-F18 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

In Stock

Fixation frame set for Dynamixel RX-64 servomotors

In Stock

Support set for RX-64, EX-106+, MX-64 and MX-106 Dynamixel servomotors

In Stock

This Robotis FR05-H101 Set of Structural Parts includes all the components you need to assemble the Dynamixel servo motors.

In Stock

Kit containing horn, frame and bearing for Dynamixel actuators

In Stock

Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.

In Stock

Mounting plate for Dynamixel actuators RX-64, EX-106+, MX-64 and MX-106

In Stock

Two frames with bolt and screws for Dynamixel MX-64 actuator.

In Stock

Fixation set for Dynamixel actuators RX-24F and RX-28

In Stock

Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators

In Stock

Support frame for Dynamixel RX-24F, RX-28 and MX-28 actuators

In Stock

Set with frame, horn and bearing for Dynamixel actuators

In Stock

Mounting plate for Dynamixel actuators RX24F, RX-28 and MX-28

In Stock

Fixation frame for Dynamixel actuators compatible with RX-24F (N101 type), RX-28 (N101 type) and MX-28 smart actuators.

In Stock

Fixation kit for Dynamixel RX-24, RX-28 and MX-28 actuators.

In Stock

Fixation frame set for the Dynamixel EX-106+ actuator

In Stock

Frame for Dynamixel actuators EX-106+ and MX-106 to control then in dual mode (two synchronized Dynamixel actuators that are controlled simultaneously in a parallel to increase the torque).

In Stock