The Trossen Robotics 350 mm 3-pin cable is a go-to Dynamixel actuator project accessory.

This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.

Use this pack of five 3P-Sync 160 mm cables for connecting two Dynamixel MX-106 and X540 servos in master/slave mode.

These 4 x 120 mm 4P cables (for wireless module) are intended exclusively for connecting your Dynamixel servo motors using the RS485 protocol.

The 4P JST Expansion Board is an extension board that allows you to add additional features to your robot.

4 cables (400m length) with 5 pin connectors for some Dynamixel servomotors, sensors and controllers (CM-100, CM-150, CM-530, CM-700).

This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.

Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 130 mm Cables for XL Servos.

Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 160 mm Cables for XL Servos.

This heavy duty 3-pin ribbon cable is compatible with the Dynamixel AX and MX actuators.

This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.

5 cables (15cm length) For 3P-5P conversion

Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.

ALF-M101 is a mounting plate compatible with the DYNAMIXEL aluminium profiles.

This kit includes 10 FP04-F1 type plastic components, compatible with Dynamixel servomotors of the AX-range.

The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.

The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.

This high-power brushed motor controller can drive up to 3 motors simultaneously with a high degree of precision.

This very compact Roboteq controller allows you to control a brushed DC motor while delivering high power and output voltages.

The Roboteq SBL 1360 A controller allows you to control motors up to 30A and 60V equipped with a Hall effect sensor or with no sensor thanks to a trapezoidal control mode.

The Roboteq SBL 1360 A controller allows you to control motors up to 30A and 60V equipped with a Hall effect sensor or with no sensor thanks to a trapezoidal control mode.

The Roboteq SBL 2360 controller can drive two brushless DC motors, with or without sensors, in sinusoidal or trapezoidal mode.

The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.

When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.