With this Spot robot accessory, you can increase the number of connections available by connecting a single device to your robot.
Do you need to make an addition to your TurtleBot3? You’ll never get caught out with the IPL-01 plate for TurtleBot Waffle!
This gripper, designed for use with the Unitree Robotics Z1 robot arm, can lift a wide variety of objects.
The LIMO simulation table tests the LIMO robot’s ability to navigate independently and analyse signals found on its journey.
The AgileX Hunter 2.0 UGV is an ultra-tough mobile robot designed for heavy loads and precise, low-speed driving scenarios.
The ICT-01 component for TurtleBot3 allows you to replace the used caterpillar parts of your robot quickly and easily. Here you go again!
The LiDAR 4D L1 developed by Unitree is a powerful detection sensor for small mobile robots, offering a 360° x 90° field of view, high precision, and optimal proximity detection.
SPOT Core I/O is a Spot robot payload designed for equipping your quadruped mobile platform with a variety of robotics accessories.
The Bunker Pro mobile robot is a tracked UGV robot with a heavy-duty design. It can handle the toughest terrain, both indoors and out, while putting up a solid defence against dust and water.
Your TurtleBot3 deserves robust and long-lasting wheels: the TB3 Wheel/Tire Set-ISW-01 is the perfect fit for your Dynamixel servos!
SPOT EAP 2: the second version of a package designed to improve the autonomy of your Spot robot dog. Equipped with a Velodyne VLP-16 lidar and SPOT CORE I/O processor.
Simultaneous localisation and mapping (SLAM), exploration, security inspection, reconnaissance... the AgileX research and development kit is an excellent choice if you have a Jetson Nano, and for anyone wanting to try it out!
This set of 12 IBB-01 supports for TurtleBot Waffle will allow you to connect various devices to upgrade your mobile robotics platform!
This radio kit makes Spot’s WiFi network more efficient (range and speed).
The pro version of the AgileX R&D kit allows you to take your development of robotic autonomous navigation and SLAM applications even further. It has an even more powerful processor and sensors!
The A01 ball caster is fully compatible with the plate of your Turtlebot3 Waffle Pi robot.
For controlling your Spot robot remotely, from wherever you are!
The AgileX Autoware open-source autonomous kit is a complete development kit for making your mobile robotic platforms fully autonomous.
This 1,800 mAh LIPO battery is the perfect choice for charging your TurtleBot 3, Robotis OP3 or DARwin-OP robot. It incorporates a PCM specially designed to protect the battery.
Navis is a autonomous navigation system compatible with all AgileX's robotic platforms. It is designed for semi-enclosed and fully enclosed scenarios.
This B1 robot dog battery offers approximately 2 hours of continuous operation.
This battery is compatible with TurtleBot3 and Robotis OP robots and incorporates a protection system.
Génération Robots' engineering design department (GR Lab) has developed a ROS research and development kit, adaptable to AgileX Robotics mobile robots.
An open source and comprehensive remote-controlled robotic platform, featuring enhanced hardware for optimal performance.