The MakerBeam T bracket can be used in all your projects based on OpenBeam and MakerBeamXL profiles.
Dynamixel is back with a groundbreaking model, the 2XC430-W250-T. A single Dynamixel servomotor to drive two axes. Two degrees of freedom for a single servomotor!
1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
One Dynamixel XM-430 servo, 3 mounting options! With the FR12-S101K set of structural components, you can mount your Robotis servo laterally.
The MX-64AR is a Dynamixel servomotor, with high-level control features and very precise. It is more powerful than the MX-28AR and features the same caracteristics than the MX-64R except for the aluminium case enabling a better heat dissipation.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
Bag of 250 regular nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL
8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
These MakerBeam L brackets allow you to design robust and durable projects based on MakerBeam or OpenBeam profiles.
The Dynamixel FR13-S102K side frame kit can be assembled on the bottom side of your Dynamixel X540 servo motor.
Bearings for MakerBeam that comes with 10 bearings, 10 M3 12mm squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts. Bearing thickness: 5mm, outside dimension: 13mm, inside diameter: 3mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam
1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
4 pieces of 300mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
These MakerBeam anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam
The XH430-W210-R is one of the most comprehensive servos in the Dynamixel range. This scalable servo offers endless possibilities and will become the perfect companion for mounting the most complex robotics platforms!
You can always do with a spare 9-wire analyser cable for your Saleae Logic or Logic16 logic analyser!
Pack of 6 Dynamixel MX-28AT actuators without any accessories
The MX-106R is a Dynamixel servomotor, with high-level control features and very precise. It is by far the most powerful of the Dynamixel servomotors.
10 cables (18cm lenght) with 4 pin connectors for the Dynamixel actuators of the MX (R version), RX and EX series.
Horn and bearing set for Dynamixel actuators compatible with the Dynamixel RX-64 (N101 type) and EX-106+.
This EPX430-BR101 kit is an enhanced extension for the X430, offering optimum performance and even greater accuracy.
Bitcraze has created a new kit for its tiny programmable Crazyflie 2.1+ drone(ROS compatible). This time it comes with a radio amplifier and ToF sensor!