Program many Dynamixel servos directly with the U2D2 Dynamixel/PC connector, for AX/MX to pro series!
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.
The Dynamixel shield for Arduino from Robotis can be used to control yourDynamixel servo motors using your Arduino board or an OpenCR controller.
Get this gear set if the gears on your AX-18A Dynamixel servo are broken or worn out.
10 cables (14cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
Mounting plate for Dynamixel actuators RX-64, EX-106+, MX-64 and MX-106
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
The Gear Set for Dynamixel XH430/XM430, Gear Ratio 210:1 includes all the replacement gears you need for your compatible Dynamixel servos.
This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
10 cables (18cm lenght) with 4 pin connectors for the Dynamixel actuators of the MX (R version), RX and EX series.
Two frames with bolt and screws for Dynamixel MX-64 actuator.
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.
The gear set for Dynamixel XH430/XM430, Gear Ratio 350:1 includes all the replacement gears you need for your compatible Dynamixel servos.
Use the M3x8 wrench bolts to fix your Dynamixel servos securely.
10 cables (20cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
The 4P JST Expansion Board is an extension board that allows you to add additional features to your robot.