The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
The Dynamixel shield for Arduino from Robotis can be used to control yourDynamixel servo motors using your Arduino board or an OpenCR controller.
The U2D2 board from Robotis enables you to supply a variety of power sources to your Dynamixel servo motors.
This pack of ten 180 mm X4P cables (convertible) is to be used with Dynamixel X-series servo motors with an RS485 interface.
This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.
Use this pack of five 3P-Sync 160 mm cables for connecting two Dynamixel MX-106 and X540 servos in master/slave mode.
These 4 x 120 mm 4P cables (for wireless module) are intended exclusively for connecting your Dynamixel servo motors using the RS485 protocol.
The gear set for Dynamixel XH430/XM430, Gear Ratio 350:1 includes all the replacement gears you need for your compatible Dynamixel servos.
The Gear Set for Dynamixel XH430/XM430, Gear Ratio 210:1 includes all the replacement gears you need for your compatible Dynamixel servos.
The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.
Use the proper bolts for fixing your Dynamixel servos!
Use the M3x8 wrench bolts to fix your Dynamixel servos securely.
The HN11-I101 Horn Set is the perfect fit for Dynamixel XL430 servos.
Flexible and strong, these 240 mm X3P cables (x10) enable a fast connection between your Dynamixel X servos and their controller.
This set of four 150 mm 2P Cables (Gearmotor) is a reliable means of connecting your gearmotor to its battery housing.
This 150 mm 2P Cable (Battery Box) (x 4) set by Robotis allows you to establish a secure connection between your servo motors and their battery housing.
This Robotis FR05-H101 Set of Structural Parts includes all the components you need to assemble the Dynamixel servo motors.
Give your robot a gripper with this Dynamixel FR12-G101GM Frame Set!
The Dynamixel FR12-H103GM Frame Set allows you to quickly attach a Dynamixel X430 series servo motor.
The Dynamixel FR12-H104K Frame Set includes all the screws and bolts needed to fix an articulated frame for a XH/XM430 or XL430 servo.
This complete idler bearing set for X540 series includes all the necessary mounting screws.
The Dynamixel FR13-S102K side frame kit can be assembled on the bottom side of your Dynamixel X540 servo motor.